SECTION 3: ASSEMBLING YOUR LAWN MOWER

To Remove Unit From Carton

•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.

•Remove loose parts included with your unit (i.e., operator’s manual, etc.).

•Cut along corners and lay carton down flat. Remove packing material.

•Roll or slide unit out of carton.

Hardware Pack

1.Carriage Bolt 1/4-20 x .75” (2)

2.Wing Nut with Bell Washer (2)

Tools Required

1.Pair of Pliers

2.Funnel

Disconnect Spark Plug Wire

•Before setting up your lawn mower, disconnect the spark plug wire from the spark plug, and ground it against the engine. See Figure 1.

NOTE: On engines with a rubber boot, attach rubber boot to a bolt on the engine to ground.

NOTE: Reference to right or left hand side of the mower is observed from the operating position.

Setting Up Your Lawn Mower

NOTE: This owner’s guide covers various models of mowers. Follow only those instructions which pertain to your unit.

•Remove the grass catcher from the unit and set it out of the way. See Figure 2 (step 1).

•Raise the lower handle in the direction shown in Figure 2 (step 2) till it snaps into place.

•Raise the upper handle in the direction shown in Figure 2 (step 3). Tighten the wing nuts which are already on the handle.

2. Lift lower

 

handle

1. Move bag

 

 

 

away

3. Lift upper handle

Spark Plug Wire With Rubber Boot

Spark Plug

All Engines

With Rubber

Boot

V-Slot

on Engine

Spark

Plug

Wire

Briggs & Stratton

Engines

Retaining

PostSpark

Plug

Spark Plug Wire

Tecumseh

Engines

Figure 2

NOTE: Your mower is shipped with the handle in the higher height position. If you wish to lower the height of the handle, refer to the Adjustment Section at this time.

•Remove the hairpin clips from the outer hole in the weld pins on the handle mounting brackets. Using a pair of pliers, squeeze one leg of the lower handle against the handle mounting bracket. Insert the hairpin clip into the inner hole on the weld pin. Repeat on the other side. See Figure 3.

Handle Mounting

Bracket

Insert hairpin clip here

Hairpin

Clip

Figure 1

IMPORTANT: This unit is shipped without gasoline or oil in the engine. Be certain to service engine with gasoline and oil before operating your mower.

Weld

Pin

Figure 3

7

Page 6 Page 8
Page 7
Image 7
MTD 540 Series manual Assembling Your Lawn Mower
Page 6 Page 8

540 Series specifications

The MTD 540 Series stands out as a versatile and powerful line of outdoor equipment designed to meet the demands of gardening enthusiasts and professionals alike. This series offers a range of features and technologies that make lawn care and landscaping tasks not only efficient but also enjoyable.

One of the primary characteristics of the MTD 540 Series is its robust build quality. Constructed from durable materials, these machines are engineered to withstand the rigors of outdoor use, ensuring longevity and reliability. Whether you are mowing a large lawn or tackling uneven terrain, the rugged design of the MTD 540 ensures it can handle the challenge with ease.

The MTD 540 Series boasts ergonomic designs, featuring comfortable grips and user-friendly controls. This focus on user experience enables operators to engage in extended periods of use without experiencing fatigue. Additionally, many models in the series incorporate adjustable cutting heights, allowing users to customize their lawn care to the specific needs of their grass type and seasonal conditions.

Equipped with advanced engine technologies, the MTD 540 Series delivers powerful performance. The engines are designed for low fuel consumption without sacrificing power, which is an essential consideration for both professional landscapers and homeowners looking to reduce operational costs. Some models feature electric start options for added convenience, allowing users to get started with minimal effort.

Another standout feature of the MTD 540 Series is its versatility. With a range of attachments available, these machines can be transformed to perform various tasks such as leaf collection, snow removal, and more. This adaptability makes the MTD 540 Series a wise investment for anyone seeking multifunctional outdoor equipment.

The safety features integrated into the MTD 540 Series further enhance its appeal. Many models come equipped with safety shutdowns to prevent accidents, as well as protective enclosures to shield the user from debris during operation.

In summary, the MTD 540 Series represents a combination of durability, comfort, and versatility. Its powerful engine performance, multifaceted capabilities, and safety features cater to the needs of both casual lawn care enthusiasts and seasoned professionals. With the MTD 540 Series, maintaining a beautiful outdoor space becomes a seamless and efficient process.
Top Page Image Contents