Handle Height

Your mower is shipped with the handle in the higher height position.To lower the handle height for your convenience, proceed as follows.

Lower

HandleNotch

Figure 11

•Remove the starter rope from the rope guide.

•Remove the upper handle by removing the hand knobs and carriage bolts. Lay the upper handle out of the way, being careful not to bend or kink the cables.

•Remove the hairpin clips from the weld pins on the handle brackets. Press outward on the legs of the lower handle, and remove it from the mower.

•Turn the lower handle around so the notches on the bottom of the lower handle are facing forward as shown in Figure 11. Reassemble, placing the bottom holes in the handle over the weld pins in the handle mounting bracket.

•Reassemble the upper handle.

•Place the hairpin clips in the inner holes in the weld pins and attach the starter rope as instructed in the assembly instructions.

Cutting Height

An adjusting plate and thumb lever at each wheel position provides cutting height adjustment. Each adjusting plate has nine height positions. Height of cut will be changed when the thumb lever is moved from one hole to another.

•Simply depress the lever towards wheel and move wheel and lever assembly to desired position. All wheels must be placed in the same relative position. See Figure 12.

Height

Adjustment

Lever

Figure 12

SECTION 7: MAINTAINING YOUR LAWN MOWER

Deck Care

NOTE: We do not recommend the use of pressure washers or garden hose to clean your unit.These may cause damage to electric components, spindles, pulleys, bearings or the engine. The use of water will shorten life of the mower and reduce its serviceability.

•The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may cause an uneven discharge of grass clippings at the next cutting.

•The deck may be cleaned by tilting the mower and scraping clean with a suitable tool (make certain the spark plug wire is disconnected).

Engine

•Refer to the separate engine manual.

Replacing Rear Flap

•To remove rear flap, cut off the flat end of the wire rod which secures it to the deck. See Figure 13.

•Attach the new flap and new rod to deck, bending the ends of the new rod over to secure to deck.

Rear Discharge

Door

Handle

Bracket

d o eR ir W

Handle

Bracket

Rear

Flap

Figure 13

12

Page 11 Page 13
Page 12
Image 12
MTD 540 Series manual Maintaining Your Lawn Mower
Page 11 Page 13

540 Series specifications

The MTD 540 Series stands out as a versatile and powerful line of outdoor equipment designed to meet the demands of gardening enthusiasts and professionals alike. This series offers a range of features and technologies that make lawn care and landscaping tasks not only efficient but also enjoyable.

One of the primary characteristics of the MTD 540 Series is its robust build quality. Constructed from durable materials, these machines are engineered to withstand the rigors of outdoor use, ensuring longevity and reliability. Whether you are mowing a large lawn or tackling uneven terrain, the rugged design of the MTD 540 ensures it can handle the challenge with ease.

The MTD 540 Series boasts ergonomic designs, featuring comfortable grips and user-friendly controls. This focus on user experience enables operators to engage in extended periods of use without experiencing fatigue. Additionally, many models in the series incorporate adjustable cutting heights, allowing users to customize their lawn care to the specific needs of their grass type and seasonal conditions.

Equipped with advanced engine technologies, the MTD 540 Series delivers powerful performance. The engines are designed for low fuel consumption without sacrificing power, which is an essential consideration for both professional landscapers and homeowners looking to reduce operational costs. Some models feature electric start options for added convenience, allowing users to get started with minimal effort.

Another standout feature of the MTD 540 Series is its versatility. With a range of attachments available, these machines can be transformed to perform various tasks such as leaf collection, snow removal, and more. This adaptability makes the MTD 540 Series a wise investment for anyone seeking multifunctional outdoor equipment.

The safety features integrated into the MTD 540 Series further enhance its appeal. Many models come equipped with safety shutdowns to prevent accidents, as well as protective enclosures to shield the user from debris during operation.

In summary, the MTD 540 Series represents a combination of durability, comfort, and versatility. Its powerful engine performance, multifaceted capabilities, and safety features cater to the needs of both casual lawn care enthusiasts and seasoned professionals. With the MTD 540 Series, maintaining a beautiful outdoor space becomes a seamless and efficient process.
Top Page Image Contents