Model Plate

1

30

3

81

11

63

6

47

C3

-00-

LLX

20

OB

28

DT.

-00-

O.

30

MP

38

Figure 1-1

Sample Model Number

1 3 A M 7 9 0 G 0 0 0

Indicates Model Series 700

Figure 1-2

To The Owner

Assistance may be needed to complete the installation of this attachment.

Determine The Model

of Your Rider

This manual is designed for installation of your new snow thrower attachment on several different tractors. It is important for you to determine which model of tractor that you have.

To determine the model of tractor, locate the model plate found underneath the seat. The model plate consists of an 11 digit/letter model number and a serial number. For ease in this installation and for future use, copy your tractor’s model number & serial number below now:

Rider Model Number:__ __ __ __ __ __ __ __

Rider Serial Number:_________________________

The 5th, 6th & 7th numbers from the left in your model number determine your rider’s model series. See Fig. 1-2.

When you fill in your model number in the space above, the actual model series number should fall into the gray shaded area.

If you have a 700 model series rider, you will need to acquire the service kit number 753-05097A to complete this installation. Call a customer support representative as instructed on Page 2 of this manual. For other models follow the instructions in this manual.

1

Rider Model Identification

NOTE:

References to LEFT

and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR, the rear end of the rider.