Assembly & Set-Up

3

 

Contents of Carton

 

 

•

Two Ignition Keys

•

One 20 oz. Bottle 5W-30 Oil

•

One Extension Cord

•

One Snow Throwers Operator’s

•

One Tecumseh Engine Operator’s

 

 

 

Manual

 

Manual

 

 

Assembly

Positioning the Upper Handle

1. Making sure not to pinch the cable in the process, pivot the upper handle into the operating position as illustrated in Figure 3-1 until it clicks into place.

Figure 3-2

2. Pivot the upper chute upward over the lip on the lower chute so that there is NO gap between the upper chute and the lower chute.

3. Secure with the hardware just removed. Refer to Figure 3-3.

Figure 3-1

Chute Handle

2.Tighten the wing knobs to secure the handle in place as in Figure 3-1.

Assembling the Discharge Chute

For shipping reasons, the snow thrower has been packaged with the upper chute pivoted all the way down. To pivot it upward, proceed as follows:

NOTE: Turn the chute until the chute opening is facing straight ahead.

1.Remove the wing knob, flat washer and carriage bolt from the lower chute. See Figure 3-2.

Figure 3-3