Auger Control Handle
Located on the upper handle, the auger control handle is used to engage and disengage drive to the auger. Squeeze the control handle against the upper handle to engage auger; release it to disengage.
Chute Assembly
Rotate the chute assembly to the left or right using chute handle. Pitch of the chute assembly controls angle at which the snow is thrown. Loosen wing knob on side of the chute assembly before pivoting chute assembly upward or downward. Retighten the knob once desired position has been achieved.
Shave Plate
The shave plate maintains contact with pavement as the snow thrower is propelled, allowing snow close to pavement’s surface to be discharged.
Gasoline Cap
Remove gas cap to add fuel.
Oil Fill
Remove cap to add oil. Refer to engine owner’s manual packed with this unit for instructions on adding oil.
Section 4 — Controls and Features