20 TLP 2824-Z User Guide 980533-001 A
Getting Started
Loading Roll Media
Placing the Roll in the Media CompartmentWhether your roll media is inside or outside wound you load it into the printer the same way.
1. Open the printer. Remember that you need to pull the release levers toward the front of
the printer.
2. Remove the outside length of media. During shipment, the roll may become dirty when
handled or dusty when stored. Removing the outside length avoids dragging adhesive or
dirty media between the print head and platen.
3. Separate and hold open the media hangers.
4. Orient the media roll so that i ts printing surface will be up as it passes over the platen.
5. Lower the roll be tween the hangers and close them onto the core.