SECTION 8: TROUBLESHOOTING GUIDE

Trouble

Possible Cause(s)

Corrective Action

 

 

 

ENGINE WILL

• Empty fuel tank

• Fill fuel tank with properly-mixed fuel

NOT START

• Primer bulb wasn’t pressed enough

• Press primer bulb fully and slowly 10 times

 

 

• Engine is flooded

• Hold throttle control and pull starter rope until it starts

 

• Old or improperly mixed fuel

• Drain gas tank and add fresh fuel mixture

 

• Fouled spark plug

• Replace or clean spark plug

 

• Plugged spark arrestor

• Clean or replace the spark arrestor

 

EZ-Start lever was not set

• Move lever to start

 

 

 

ENGINE WILL

• Air filter is plugged

• Replace or clean the air filter

NOT IDLE

• Old or improperly mixed fuel

• Drain gas tank and add fresh fuel mixture

 

 

• Improper carburetor adjustment

• Adjust according to the Carburetor Adjustment section

 

 

 

ENGINE WILL

• Old or improperly mixed fuel

• Drain gas tank and add fresh fuel mixture

NOT

• Improper carburetor adjustment

• Take to an authorized service dealer for adjustment

ACCELERATE

• Cutting attachment bound with grass

• Stop the engine and clean the cutting attachment

 

 

• Dirty air filter

• Clean or replace the air filter

 

• Plugged spark arrestor

• Clean or replace spark arrestor

 

 

 

ENGINE

• Old or improperly mixed fuel

• Drain gas tank and add fresh fuel mixture

LACKS

• Improper carburetor adjustment

• Take to an authorized service dealer for adjustment

POWER OR

• Fouled spark plug

• Replace or clean spark plug

STALLS WHEN

• Plugged spark arrestor

• Clean or replace the spark arrestor

CUTTING

 

 

 

CUTTING

• Cutting attachment bound with grass

• Stop the engine and clean cutting attachment

ATTACHMENT

• Cutting attachment out of line

• Refill with new line

WILL NOT

• Inner reel bound up

• Replace the inner reel

ADVANCE LINE

• Cutting head is dirty

• Clean inner reel and outer spool

 

 

• Line welded

• Disassemble, remove the welded section and rewind

 

• Line twisted when refilled

• Disassemble and rewind the line

 

• Not enough line is exposed

• Push the bump knob and pull out line until 4 inches

 

 

(102 mm) of line is outside of the cutting attachment

 

 

 

CUTTING LINE

• Oil is in the cutting head

• Clean the cutting head attachment

ADVANCES

 

 

WILDLY

 

 

 

 

 

If further assistance is required, contact your authorized service dealer

19

Page 19
Image 19
MTD YM75 manual Troubleshooting Guide, Trouble Possible Causes Corrective Action

YM75 specifications

The MTD YM75 is a compact and efficient tractor designed for a variety of agricultural and landscaping tasks. Known for its versatility and robust performance, the YM75 is favored by many small-scale farmers and landowners looking to enhance their productivity.

One of the standout features of the MTD YM75 is its powerful engine. The tractor is equipped with a reliable diesel engine that has a displacement of 1.7 liters, delivering around 75 horsepower. This impressive power allows the YM75 to tackle tough tasks such as plowing, tilling, and hauling materials with ease. The efficiency of its engine not only provides ample power but also ensures lower fuel consumption, making it economical for long-term use.

The MTD YM75 incorporates advanced technologies that make it user-friendly and efficient. The tractor features a synchronized transmission system, allowing for smooth gear shifts and precise control over speed and torque. This is particularly beneficial when operating various implements or navigating challenging terrains. Additionally, the tractor's compact design enables it to maneuver effortlessly in tight spaces, making it suitable for small farms and gardens.

The hydraulic system of the YM75 is another highlight, boasting a high lifting capacity. This enables the attachment of various implements, such as front loaders, backhoes, and other tools, enhancing the tractor's versatility. The hydraulic setup is designed to be responsive, providing operators with the ability to control attachments with precision.

In terms of operator comfort, the MTD YM75 does not disappoint. It features an ergonomic cabin with adjustable seating, providing a comfortable driving experience even during long working hours. The controls are intuitively placed, allowing for easy access and minimizing distractions while operating the machinery.

Durability is a key characteristic of the MTD YM75. Built with high-quality materials and robust construction, this tractor is designed to withstand the rigors of daily agricultural work. Its rugged tires ensure excellent traction and stability on various terrains, contributing to its overall reliability.

In summary, the MTD YM75 is a powerful, versatile, and user-friendly tractor that meets the needs of modern farmers and landscapers. With its efficient engine, advanced hydraulic system, ergonomic design, and durability, it stands out as an excellent choice for enhancing productivity in any agricultural setting. Whether for tilling the land or managing landscaping projects, the YM75 proves to be an invaluable asset.