Congratulation, Introduction | MTX Audio SW1212, SW1515, SW1010

CONGRATULATION...

... on your purchase of a MTX powered home subwoofer system. Your new subwoofer is one of the most exciting home entertainment electronic products available, adding impact and realism to recorded music and the wide variety of movies to be found on videotape, laser disc, DVD and off-the-air broadcasts.

Once set-up and properly adjusted, it should give you many years of entertainment pleasure.

Your subwoofer is a high value product built in America using the latest materials, technology, and equipment by MTX, a vertically integrated company.

Thank you for selecting MTX in making your audio equipment purchase.

INTRODUCTION

Your new subwoofer has many features which help to deliver great bass performance and make it a remarkable value.

* High efficiency amplifier:

The SW1010, SW1212 (class A/B) and SW1515 ( class D) represent the latest amplifier technology with active compression circuits for higher SPL without breakup during high amplitude peaks.

* Versatile hook-up and operation:

Your new subwoofer has a variety of input and output connections that make it easy to set-up and use in almost any stereo or home theatre system.

* Low distortion woofers:

Each woofer uses an overhung voice coil and large excursion suspension to produce higher sound pressure levels with lower distortion.

* Optimal enclosures:

Each enclosure is designed to match the parameters of its woofer to maximize performance. Passive radiators are used for less distortion at the bottom of the frequency range.

SET-UP AND ADJUSTMENT

After you have selected an initial location for your subwoofer and have connected it into your system, have a seat in your normal listening position and have someone help you with the following adjustments:

A)If you are using the line level inputs and your main speakers are receiving a full range signal, set the subwoofer crossover frequency control to its full counterclockwise position.

B)Set the polarity switch to the “normal” position and the level control to the full counterclockwise position at “minimum”.

C)Turn off the loudness control and set the bass tone control on your main amplifier to the flat position.

D)Use familiar program material that has substantial bass content and play your main system at a moderate volume level.

E)Slowly rotate the subwoofer level control clockwise until a good balance is achieved between the low frequency output of your subwoofer and the mid bass and upper frequencies from your main speakers.

F)Slowly rotate the subwoofer crossover frequency control clockwise to attain the best blend between the level of the subwoofer and the main speakers in the midbass crossover region. Advancing the control too far will cause a “boominess” in the overall sound and will add an unnatural “chesty” quality to male voices

G)Change the polarity switch from “normal” to “reverse” to determine which position results in the most overall bass output. Leave the switch in the position that gives the highest output level.

SW1010, SW1515, SW1212 specifications

MTX Audio has established itself as a leading brand in the realm of car audio systems, and its subwoofers like the SW1010, SW1515, and SW1212 are prime examples of why they remain at the forefront of the industry. Each subwoofer in this trio showcases advanced engineering and technology, designed for enthusiasts who demand high-quality sound and performance.

The MTX SW1010 is a 10-inch subwoofer that stands out for its impressive power handling capabilities. With a peak power rating of around 1,000 watts, it delivers thunderous bass that resonates through any vehicle. The subwoofer features a reinforced paper cone that enhances durability while ensuring optimal sound quality. Additionally, the rubber surround provides improved flexibility and reduces distortion, allowing for a seamless listening experience at high volumes.

Moving to the SW1515, this impressive 15-inch subwoofer is designed for those who crave serious bass. With a peak handling power that can reach up to 1,500 watts, the SW1515 is engineered to deliver deep, powerful bass that can fill even the largest vehicles. Its large voice coil enhances heat dissipation, ensuring the subwoofer can handle extended periods of heavy use without overheating. The heavy-duty construction includes a robust steel frame that provides stability and minimizes vibrations.

The SW1212, a 12-inch subwoofer, strikes an ideal balance between size and power. With peak power handling of around 1,200 watts, it is perfect for users who want impactful bass without compromising too much on space. The SW1212 incorporates MTX’s advanced technologies such as a dual voice coil design, allowing for versatile wiring options to accommodate different setups. This feature enhances the subwoofer's performance regardless of the specific configuration used.

What sets all three subwoofers apart is their adherence to MTX’s commitment to quality sound. The incorporation of advanced materials and engineering techniques not only ensures robust performance but also longevity. The subwoofers are designed to provide clear, distortion-free bass, enhancing overall audio fidelity across various genres of music.

In summary, the MTX Audio SW1010, SW1515, and SW1212 subwoofers each feature substantial power handling capabilities, durable construction, and advanced technologies that contribute to their impressive performance. Whether you're a casual listener or a hardcore audiophile, these subwoofers offer an exceptional listening experience that will elevate any car audio system.

MTX Audio SW1212, SW1515, SW1010 owner manual Congratulation, Introduction, SET-UP and Adjustment

Models: SW1010 SW1515 SW1212