18
ISI5634PCI/4/8 Quick Start Guide
Introduction
The ISI5634PCI card ships with drivers for each of the following
operating systems: Windows® 2000, Windows NT, Windows 95,
Windows 98, Windows Me, Novell Netware version 5.x, SCO Open
Server 5, and Linux. This chapter describes the installation of these
drivers.
In most cases, you will receive the ISI drivers on a CD-ROM. In
certain situations, however, software may be downloaded from the
MultiTech web site, often onto diskette, and then installed. The
instructions in this chapter generally presume that the driver files are
being installed from CD-ROM and therefore show driver files being
loaded from locations on the ISI Family CD-ROM. If installation is
from diskette, you will be loading driver files from file path locations
on that diskette. For example, a driver file found at
E:\servcard\drivers\win2000\ when installing from CD-
ROM, might be located simply at A:\ if installation is from diskette.
Installing a device driver modifies your system. For this reason, only
the super user (system administrator) is allowed to perform the
installation. If you cannot login as administrator, find the person in
your organization with this authorization (i.e., password). To begin
driver installation, login as administrator. Then proceed with the
appropriate section: Windows 2000, Windows NT or Windows 95/98/
Me. For Novell Netware, you need rights to read and write to the
SYSTEM directory. The Unix-based operating systems, SCO and
Linux, similarly require such administrative rights.
Windows 2000: Driver Installation
NOTE: A series of installation wizard screens will appear
repeatedly during this procedure (steps 11 through 15). This is not
an error. Do not discontinue the procedure when the installation
wizard screens repeatedly appear.
1. Ensure that your ISI5634PCI card has been installed according to
the Hardware Installation Procedures in Chapter 2.
2. Turn on the PC and start Windows 2000.