40
ISI5634PCI/4/8 Quick Start Guide
SCO Open Server 5 Driver Installation
The ISI driver for SCO Open Server 5 is shipped on ISI Family CD-ROM
(FAT file system) and can also be downloaded from the Multi-Tech
web site. In both cases, the driver files are compressed (tarred).
Users installing from the CD-ROM should begin at To install from
CD-ROM directly below. Users installing from a floppy disk should
skip down to To install driver from floppy disk later in this section.
The filename of the SCO5 driver in its tarred form is sco50x.tar.
This present installation section is task-oriented with minimal
explanation of procedural steps. The section Multi-Tech Installation
Script, which immediately follows this section, presents additional
details to aid in installation.
To install from CD-ROM:
# mount -r /dev/cd0 /mnt
# cd /mnt
# cd servcard/drivers/sco50x
#cp sco50x.tar /
# cd <ENTER>

To format a floppy disk for SCO5:

1. At the Unix prompt, run the scosh program.
2. Select Manager.
3. Select Archive.
4. Select Format.
5. Make sure that Device is pointed to the floppy drive.
6. Select Continue.

To untar the driver file and copy files onto floppy disk:

1. Make a temporary directory for the ISI driver files..
# mkdir /isi
2. Copy the tarred isi driver file into the temporary directory.