27
Chapter 3—Driver Installation - Windows NT
Windows NT: Driver Installation
The following procedure describes how to install the ISI5634PCI in a
system operating Microsoft Windows NT 4.0 for use with Remote
Access Service (RAS) server and other communications/fax server
type applications.
1. Ensure that your ISI5634PCI card has been installed according to
the Hardware Installation Procedures in Chapter 2.
2. Turn on the PC and start Windows NT.
3. Insert the ISI Family CD-ROM into the CD-ROM drive (if drivers
have been downloaded from the MultiTech web site, they will
typically be on diskette; in that case, insert diskette into floppy
drive).
4. Click Start, Settings, Control Panel, and then double-click
Network. In the Network dialog box, click the Adapters tab.
Click Add.