MultiMobile MT128ZLX User Guide 4: Windows NT Driver Procedures
104
4. If for any reason the IRQ or I/O Port are not the same as the ones you specified earlier, go back and
repeat the Windows NT procedure at step 11 and then re-check that the correct IRQ and I/O Port values
have been assigned. If you still have problems with this, call MultiTech’s Tech Support group at 1-800-
972-2439.
Configuring the MT128ZLX in Windows NT4
NOTE: In this procedure, you will be asked to enter detailed configuration information that relates to the
ISDN equipment being used by your telephone company. Specifi cally, your telephone company must
provide the following information:
SPIDs,
Phone Numbers,
Switch Type, and
Voice Encoding type (or “Analog Encoder”).
This information is supplied by your telephone company and you must have it
available when doing this procedure.
1. Go to Start | Settings | Control Panel | Network. At the Network screen, click on the Adapters tab.
Highlight “MultiMobile MT128STZLX Adapter.” Click on Properties.