MultiMobile MT128ZLX User Guide 6: Windows ME API Usage
217
Windows ME CAPI: Dual Channel Access Example (MultiLink)NOTE: To complete this procedure, you will need to know several technical details that can be provided by
your ISP or by your network administrator.
1. You will need to know whether or not an encrypted password is needed to access the
network to which you will be connected.
2. If you are connecting to a non-Windows server, you will also need to know in advance
whether or not the server requires you to type in login information or to know TCP/IP
addresses before dialing.
3. If applicable, you will need to know the domain name of the network to which you will be
connected.
4. You will need to know the dial-out network protocol to be used (NetBEUI, TCP/IP, or IPX).
If you would like to use multi-linking with your CAPI co nnection, first be sure that your ISDN provider
supports a 128kbps MLP option.
The ports you link must first be enabled through R VS-Com. In this example, the RVS ISDN V.120
modems are used.
1. To enable the ports in RVS-Com, open the RVS-Com Comm Cen ter.
2. Click the Services tab. In the Virtual Com Ports section of the window, place a check mark in front of
both ports. Associate each port with a unique COM port number (the two devices must use different COM
ports).
Click Apply, and then OK.
Next you will need to identify the two modems to be linked or installed.
3. Install the virtual modem for your MT128ZLX in Win dows ME by selecting Start | Settings | Control
Panel | Add. Windows ME will prepare to detect your modem. The Install New Modems scr een will
appear.
Click on “Do not detect my modem; I will select it from a list .”
Click Next>.