Multi-Tech Systems MT5600BA manual Install and Configure Your Software

MultiModemII Quick Start Guide

2.In the Install New Modem wizard, select Don’t detect my modem; I will select it from a list, and then click Next. A dialog box with a list of manufacturers and a list of modem models appears.

3.Insert the installation CD into your CD-ROM drive, and then click Have Disk.

4.In the Install from Disk dialog box, select the drive the CD is in, and then click OK.

5.A list of modems appears. Select your modem from the list, and then click Next.

6.Select the port the modem is connected to, and then click Next.

7.Windows installs and configures the modem.

8.Click Finish to exit.

Step 3: Install and Configure Your Software

You may use either the communication program included with your modem or a third-party program. Communication programs designed for Windows 95/98/Me and Windows NT/2000 normally do not need to be manually configured, since they use the Plug and Play configuration of the Win- dows modem driver. Communication programs designed for DOS and other operating systems, however, may need to be manually configured to work with your modem. Though each communication program is different, the following procedure should work with most of them.

1.Install and run your communication program.

2.Find the dialog box or menu that lets you select your mo- dem. (In Windows Terminal select Settings Modem Commands; in HyperTerminal select File Properties Phone Number; and in PhoneTools select Configure General Configuration Communication Change Modem.

6