MultiModemDSVD User Guide | 3 Operation |
Fax Operation
Using the PhoneTools program included with your modem, you can use your modem to send and receive faxes directly from your computer. The following procedure uses print capture, which enables you to fax a document directly from the Windows application in which you created it without opening PhoneTools.
1.Create a document in a Windows application, such as a word processor, graphic editor, or spreadsheet. To fax the document, keep the application and the docu- ment open and select the Print command from the File menu.
2.Select CAPTURE FAX BVRP as the printer driver, and then click OK. The Send Fax wizard appears.
3.In the Recipient section, type the required information or extract it from the Phone Book by clicking 
.
4.In the Template section, optionally select a cover page and type a cover message.
5.Select the document to be sent. The default file when sending from within a Win- dows application is Capture.dgr.
6.Select the date and time to send the document, if you do not want to send it immediately.
7.Click Finish to start the transmission.
Voice Operation
Operation in DSVD mode allows data transfer and voice conversation to occur simultaneously during a data connection. On a DSVD call, a headset or microphone and speaker can be used as the voice interface. Both local and remote modems must have compatible DSVD technology to support the DSVD function. DSVD can be used by running a communications application that supports DSVD. Follow the application instructions. DSVD can also be controlled manually issuing AT commands to the modem as described in the following sections.
To Originate a Voice Call in Speakerphone Mode
1.In the terminal window of your communications application, type AT and press ENTER. The modem will respond with OK.
2.Type AT&F and press ENTER to reset the modem to its default configuration.
3.Type AT#CLS=8#VRN=0#VLS=6 and press ENTER to initialize the modem for speakerphone mode.
4.To dial, type ATDTnnnnnnn and press ENTER, where nnnnnnn is the phone num- ber of a remote party. The modem will report VCON at the completion of dialing to indicate the speakerphone is on.
5.To hang up, type +++ATH and press ENTER.
24 |