2 Installation

Introduction

This chapter shows you step-by-step how to set up your Multi-Tech modem, test it, and make your first calls.

What You Will Need

Before starting, make sure you have everything you will need.

We supply

An MT5600ZDX data/fax modem or a MT5600ZDXV voice/data/fax modem

A DC power transformer

One RJ11 phone cable

A printed Quick Start Guide

An system CD containing modem drivers, this User Guide, a communications software package (PhoneTools) and other software programs

Four vinyl gripper feet for the bottom of the modem

You supply

A computer with an available serial port. The processor speed should be at least 75 MHz in order to take full advantage of the ZDXV’s telephony features.

A shielded RS232 serial cable with a male DB-25 connector on one end and a connector to match your computer’s serial port on the other end.

A nearby AC power outlet

A nearby phone jack

(Optional) If you want speakerphone functions along with the ability to record sound or .WAV files through the sound card at the same time, you will need:

One stereo PC microphone

One stereo male to male patch cord

One sound card

Speakers

Safety Warnings

Use this product only with UL- and CUL-listed computers.

Never install phone wiring during a lightning storm.

Never install a phone jack in a wet location unless the jack is specifically designed for wet locations.

Never touch uninsulated phone wires or terminals unless the phone line has been disconnected at the network interface.

Use caution when installing or modifying phone lines.

Avoid using a phone (other than a cordless type) during an electrical storm; there is a risk of electrical shock from lightning.

Do not use a phone in the vicinity of a gas leak.

To reduce the risk of fire, use only 26 AWG or larger telephone line cord.

6