Manuals / Brands / Computer Equipment / Modem / Multi-Tech Systems / Computer Equipment / Modem

Multi-Tech Systems PN S000408C Dial Backup and Leased Line Restore Setup

1 56

Download 56 pages, 638.59 Kb

Chapter 4 – Leased Line Operation

Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 31

Dial Backup and Leased Line Restore Setup

1. Connect a telephone cable to the LINE jack of an MT5600BA-V92 modem set up for leased

line operation. Connect the other end of the cable to a standard dialup line jack.

2. Turn on the modem.

3. Starting at the STATUS LCD, press the following buttons on the front panel: È, È, Æ, È, Æ,

Æ, Æ. The ENTER NUMBER LCD appears.

4. Press the ÇÅ or È button several times to select the first digit in the dial backup telephone

number.

5. Press the Æ button to go to the next digit in the number.

Note: To backspace or to cancel an entry, press Æ several times.

6. The number can be up to 30 characters in length. Repeat steps 4 and 5 until the number is

entered, and then press the Enter button to store it. The DIAL BACKUP # STORED LCD

appears.

7. Press the Enter button again to go to the DIAL BACKUP NUMBER LCD.

Note: Steps 8 through 15 are optional.

8. To change the default restore time, press È to go to the TIME TO RESTORE (S15) LCD,

then press Æ, Æ. The ENTER TIME IN MINUTES LCD appears.

9. Press the ÇÅ or È button several times to select the first digit in the number.

10. Press the Æ button to go to the next digit in the number.

11. Repeat steps 9 and 10 until you have entered a value between 10 and 255, or 0 to disable

dial backup, and then press the Enter button to store it. The TIME STORED LCD appears.

12. Press the Enter button to return to the TIME TO RESTORE (S15) LCD.

13. To change the default dial backup time, press È to go to the DIAL BACKUP TIME (S17)

LCD, then press Æ, Æ. The ENTER TIME IN MINUTES LCD appears.

14. Repeat steps 9 and 10 until you have entered a value between 0 and 255, and then press the

Enter button to store it. The TIME STORED LCD appears.

15. Press the Enter button again to return to the DIAL BACKUP TIME (S17) LCD.

16. Dial backup and leased line restore setup is complete.

Notes:

• Registers S15 and S17 can also be changed using the Sr=n AT command. See the AT

Command Reference Guide on the CD that was shipped with your modem.

• The dial backup number can be displayed only 16 characters at a time. To see

characters 17–30, press the È button. To go to the previous LCD, press the Å button. To

go to the next LCD, press the Æ button.

Contents

Main MultiModem II Data/Fax Modem User Guide Page Page Chapter 1 Product Description and Features Product Description Features Safety Warnings About AT Commands Technical Specifications Page Chapter 2 - Installation Step 1 - Connect the Modem to Your System Connect the Modem to Your PC Connect the Modem to the Telephone Line (Dialup Connection) Two-Wire or Four-Wire Leased Line Connection Step 2 - Install the Modem Driver Installing the Modem Driver Step 3 - Setting Your Country or Region Code Using the LCD Panel Country or Region Codes Using the Global Wizard Using AT Commands Step 4 - Install PhoneTools Chapter 3 - Using the Front Panel Modem Configuration LED Indicators Liquid Crystal Display (LCD) Option Selection Menu Structure Status Trunk Page Page Advanced Options Trunk Advanced Options Trunk Continued Remote Configuration Options Trunk Diagnostic Options Trunk Phone Number Memory Options Trunk Caller ID Options Trunk Chapter 3 Using the Front Panel Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 21 Setting Country/Region Codes Trunk Functionality of Menu Options Status STATUS = IDLE STATUS = ONLINE RINGING Basic Options ONLINE OPTIONS DIALING OPTIONS COMMAND MODE OPTIONS SYNC/ASYNC OPTIONS RESET FACTORY DEFAULTS CONNECT RATE OPTIONS Advanced Options RS232 OPTIONS DIALBACKUP/LL OPTIONS CALLBACK SECURITY S-REGISTER OPTIONS MONITOR OPTIONS Remote Configuration Options ENABLE/DISABLE R.C REMOTE CONFIG. PASSWORD Diagnostic Options Phone Number Memory Options Caller ID Options Region Select Options Chapter 4 - Leased Line Operation Two-Wire / Four-Wire Setup Four-Wire Setup Dial Backup Dial Backup and Leased Line Restore Setup Chapter 5 - Remote Configuration Basic Procedure Setup Changing the Remote Configuration Password Changing the Remote Escape Character Chapter 6 - Callback Security Setup Procedures Turning Callback Security On and Off AT Command Method Front Panel Method Assigning Callback Passwords AT Command Method Front Panel Method Assigning Callback Phone Numbers AT Command Method Front Panel Method Calling Procedure Callback Security Commands Chapter 7 - Troubleshooting None of the Indicators Light The Modem Does Not Respond to Commands The Modem Cannot Connect When Dialing The Modem Disconnects While Online The Modem Cannot Connect When Answering File Transfer Is Slower Than It Should Be Data Is Being Lost There Are Garbage Characters on the Monitor The Modem Doesnt Work with Caller ID Appendix A - Regulatory Compliance FCC Part 68 Telecom Canadian Limitations Notice EMC, Safety, and R&TTE Directive Compliance International Modem Restrictions New Zealand Telecom Warning Notice South African Notice Appendix B - Upgrading the Firmware Introduction Upgrade Overview Step 1 - Identify the Modem Firmware Step 2 - Identify the Current Firmware Version Step 3 - Download the Upgrade File Step 4 - Extract the Upgrade Files Step 5 - Clear Your Stored Parameters Step 6 - Upgrade the Modems Firmware Step 7 - Restore Your Parameters Appendix C - Installing a Modem Under Linux Introduction Standard Linux Serial Port Definitions Installation Setup Page Appendix D - Pin Descriptions RS-232 Pin Descriptions RS-232 Cable Pinouts 25-Pin to 25-Pin RS-232 Cable Four-Wire Leased-Line Cable Leased Line Pinouts 9-Pin to 25-Pin RS-232 Cable Appendix E Waste Electrical and Electronic Equipment Statement WEEE Directive Appendix F ROHS HT/TS Substance Concentration Index Multi-Tech Systems, Inc. MT5600BA-V92 User Guide 55 Index A B C P R S T U