TRENDnet v.92 PCI MODEM, 1206 Section, System Setup, Setup instructions for Windows 98SE

	I206 V.92 PCI MODEM USER’S MANUAL
Section 2.3	System Setup
Section 2.3.1	Setup instructions for Windows 98SE

STEP 1. After you complete the modem hardware installation and turn on your PC, Windows system will automatically detect your new added devices. Windows system will then prompt you with an Add New Hardware Wizard screen as shown in figure.

Then click on Next.

STEP 2. A prompt screen will ask you to select Search for the best driver for your device or display a list of all the drivers in a specific location, so you can select the driver you want.

Please select the recommended one as shown in figure.

Then click on Next.

STEP 3. And then, a prompt screen will ask you to indicate where your driver is located, floppy disk drives, CD-ROM drive, Microsoft Windows Update or specify a location: .

Insert the Modem Driver CD-ROM disk attached with your modem into the CD-ROM drive device. Then select Specify a location as shown in figure.

Click on Next.

Rev.1.00.2.1.57.75 - 4 -