| I206 V.92 PCI MODEM USER’S MANUAL |
|
|
Appendix 1 | Modem Specifications |
Modulation standard | : V.92, V.90, K56 flex, V.34+, V.34, V.32bis, V.32, V.29, V.27ter, V.22bis, |
| V.23, V.22, V.21, V.17, Bell212/103 |
Compression | : V.42bis, MNP Class 5 |
Error Correction | : V.44, V.42, MNP Class |
Host Interface | : PCI bus |
FAX Group | : Group III |
FAX Command | : EIA/TIA 578 class 1 |
Power | : 0.75 W max |
Temperature | : 0 to 55 degrees C, operating; |
Appendix 2 Government compliance notices
FCC compliance
This equipment complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other information, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.
If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If possible, they will notify in advance. But, if advance notice isn’t practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect proper operation of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.
The FCC prohibits this equipment to be connected to party lines or
In the event that this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If the problem is with the equipment, discontinue use and contact your dealer or vendor.
Rev.1.00.2.1.57.75 | - 22 - |
