Additional information

Specifications

Amplifier section

Continuous average power output of 110 watts* per channel, min., at 8 ohms, from 20 Hz to 20,000 Hz with no more than 0.09%** total harmonic distortion (front).

Continuous Power Output

Front. . . . . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Center . . . . . . . . . . . . . . . . . . . 110 W (20 Hz-20 kHz, 0.09%) Surround . . . . . . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%) Surround back . . . . 110 W + 110 W (20 Hz-20 kHz, 0.09%)

Audio Section

Input (Sensitivity/Impedance)

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/47 kΩ Frequency Response

LINE. . . . . . . . . . . . . . . . . . . . . .5 Hz to 100,000 Hz dB Output (Level/Impedance)

REC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335 mV/2.2 kΩ Tone Control

BASS . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (100 Hz) TREBLE . . . . . . . . . . . . . . . . . . . . . . . . . ± 6 dB (10 kHz) LOUDNESS. . . . . . . . . . . . . . +4/+2 dB (100Hz/10 kHz)

(at volume position –40dB)

Signal-to-Noise Ratio (IHF, short circuited, A network) LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 dB

Signal-to-Noise Ratio [EIA, at 1W (1kHz)]

LINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 dB

*Measured pursuant to the Federal Trade Commission’s Trade Regulation rule on Power Output Claims for Amplifiers

**Measured by Audio Spectrum Analyzer

12

Antenna Input . . . . . . . . . . . . . . . . . . . . . . 75 Ω unbalanced

AM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 530 kHz to 1,700 kHz Sensitivity (IHF, Loop antenna) . . . . . . . . . . . . . . . 350 µV/m Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 50 dB Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Loop antenna

Miscellaneous

Power Requirements. . . . . . . . . . . . . . . . . . .AC 120 V, 60 Hz Power Consumption . . . . . . . . . . . . . . . . . . . . 480 W, 630 VA In standby . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.43 W AC Outlet . . . . . . . . . . . . . . . . . . . . . (switched) 100 W MAX. Dimensions . . . . . . . . . . . . 420 (W) x 173 (H) x 465 (D) mm

(16 9/16 (W) x 6 13/16 (H) x 18 5/16 (D) in.) Weight (without package). . . . . . . . . . . . . . .15.5 kg (34.2 lb)

Furnished Parts

Microphone (for Auto MCACC setup) . . . . . . . . . . . . . . 1 Microphone stand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AA/LR6 dry cell batteries . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 AM loop antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FM wire antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 These operating instructions . . . . . . . . . . . . . . . . . . . . . . . . 1

Note

•Specifications and the design are subject to possible modifications without notice, due to improvements.

Composite Video / S-Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 10 MHz dB

Component Video Section

Input (Sensitivity/Impedance) . . . . . . . . . . . . . . 1 Vp-p/75 Ω Output (Level/Impedance) . . . . . . . . . . . . . . . . . 1 Vp-p/75 Ω Signal-to-Noise Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . 65 dB Frequency Response . . . . . . . . . . . . . 5 Hz to 40 MHz dB

Cleaning the unit

•Use a polishing cloth or dry cloth to wipe off dust and dirt.

•When the surface is dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times with water, and wrung out well, and then wipe again with a dry cloth. Do not use furniture wax or cleansers.

•Never use thinners, benzine, insecticide sprays or other chemicals on or near this unit, since these will corrode the surface.

FM Tuner Section

Frequency Range . . . . . . . . . . . . . . . . 87.5 MHz to 108 MHz Usable Sensitivity . . . . . . Mono: 13.2 dBf, IHF (1.3 µV/75 Ω) 50 dB Quieting Sensitivity . . . . . . . . . . . . . . Mono: 20.2 dBf Stereo: 38.6 dBf Signal-to-Noise Ratio . . . . . . . . . . . Mono: 73 dB (at 85 dBf) Stereo: 70 dB (at 85 dBf)

Distortion . . . . . . . . . . . . . . . . . . . . . . . Stereo: 0.5% (1 kHz) Alternate Channel Selectivity . . . . . . . . . . . 60 dB (400 kHz) Stereo Separation . . . . . . . . . . . . . . . . . . . . . . 40 dB (1 kHz) Frequency Response . . . . . . . . . . . . 30 Hz to 15 kHz ± 1dB

77

En

Page 76 Page 78
Page 77
Image 77
Pioneer VSX-52TX manual Additional information Specifications, Cleaning the unit
Page 76 Page 78

VSX-52TX specifications

The Pioneer VSX-52TX is a remarkable AV receiver that stands out in the realm of home theater systems, well-known for its high-quality sound performance and an array of advanced features. Designed to cater to the needs of audiophiles and casual listeners alike, the VSX-52TX integrates cutting-edge technologies that elevate the home entertainment experience.

One of the prominent features of the VSX-52TX is its 7.1 channel amplification system, providing a robust output of 120 watts per channel. This ensures that users can enjoy crystal-clear audio across various setups, whether it’s a simple stereo configuration or a full surround sound experience. The receiver supports a wide range of audio formats, including Dolby TrueHD and DTS-HD Master Audio, allowing for an immersive soundstage that brings movies, music, and games to life.

Incorporating Advanced MCACC (Multi-Channel Acoustic Calibration System), the VSX-52TX offers automatic speaker calibration, which fine-tunes the surround sound experience based on the unique acoustics of your room. This technology analyzes the speaker layout and optimizes the audio output for consistent and dynamic sound quality.

Another defining characteristic of the VSX-52TX is its extensive connectivity options. Equipped with multiple HDMI inputs, the receiver can handle various high-definition devices, making it easy to connect Blu-ray players, gaming consoles, and streaming devices. The inclusion of HDMI version 1.4 also allows for 3D video pass-through and Audio Return Channel (ARC), enhancing its versatility for modern home theaters.

The user-friendly interface of the VSX-52TX is complemented by its compatibility with network streaming. It supports popular services like Spotify, Pandora, and vTuner, enabling users to access their favorite content with ease. Additionally, the built-in USB port allows for easy playback of music files from USB drives.

The receiver showcases a sleek, modern design that integrates seamlessly into any home decor. The informative front display ensures that users can easily navigate through settings and features, while the remote control provides convenient access to all functionalities from a distance.

Overall, the Pioneer VSX-52TX is a powerful and versatile AV receiver that combines sophisticated technology with user-friendly features, making it an excellent choice for anyone looking to enhance their home theater experience. With superior audio capabilities, network streaming options, and advanced calibration technologies, the VSX-52TX continues to be a prominent choice for both music enthusiasts and movie lovers.
Top Page Image Contents