Other Settings
Multi Room Setup
• Default setting: VARIABLE / Setting 1
If you’ve made
1Select ‘Multi Room Setup’ from the Other Setup menu.
6. | Other Setup |
|
[ | a. DRC Setup | ] |
[ | b. Dual Mono Setup | ] |
[ | c . LFE ATT Setup | ] |
[ | d. SR+ Setup | ] |
[ | e . Multi Room Setup | ] |
[ | f . 12V Trigger Setup | ] |
2 Select the volume level setting.
6e. Multi Room Setup | 6f. Multi Room Setup | ||||
Volume Level | Volume Level | ||||
[ | VARIABLE | ] | [ | FIXED | ] |
IR Setting |
|
| IR Setting |
|
|
| [Setting 1] | [Setting 1] |
11
Note
•Some IR receivers may not work with this receiver. Check with your audio dealer for more information.
12 Volt Trigger Setup
• Default setting: OFF (all components)
After connecting a component the 12 volt trigger (see Switching components on and off using the 12 volt trigger on page 62), it switches on automatically when you select an input function set to switch the trigger on. Specify which input functions switch on the trigger below.
1Select ‘12V Trigger Setup’ from the Other Setup menu.
6. | Other Setup |
| |
[ |
| a. DRC Setup | ] |
[ |
| b. Dual Mono Setup | ] |
[ |
| c . LFE ATT Setup | ] |
[ |
| d. SR+ Setup | ] |
[ |
| e . Multi Room Setup | ] |
[ |
| f . 12V Trigger Setup | ] |
CAUTION:If the "FIXED" | CAUTION:If the "FIXED" |
position is chosen, the | position is chosen, the |
volume will be loud. | volume will be loud. |
•VARIABLE – Use this setting if you’ve connected a power amplifier in the sub room (this receiver is simply being used as a
•FIXED – Use this setting if you’ve connected a fully integrated amplifier (such as another Pioneer VSX receiver) in the sub room and want to use that receiver’s volume controls.
Caution
•With the FIXED setting, the source is sent from this receiver at maximum volume, so make sure the volume is quite low in the sub room at first and then experiment to find the correct level.
3 Select the type of IR receiver you’re using.
6e. Multi Room Setup
Volume Level
[ VARIABLE ]
IR Setting
[ Setting 1 ]
•Setting 1 – Use this setting for most IR receivers.
•Setting 2 – Use this setting if the IR receiver you’re using doesn’t seem to work after selecting Setting 1.
4When you're finished, press RETURN. You will return to the Other Setup menu.
2Select an input function and choose the setting that you want.
This should be the input function, that when selected, switches on the 12 volt trigger.
6f. 12V Trigger Setup | 6f. 12V Trigger Setup | ||||||
DVD/LD | [ |
| ] | DVD/LD | [ |
| ] |
OFF | ON | ||||||
TV/SAT | [ | OFF | ] | TV/SAT | [ | OFF | ] |
DVR | [ OFF ] | DVR | [ OFF ] | ||||
VIDEO1 | [ OFF ] | VIDEO1 | [ OFF ] | ||||
VIDEO2 | [ OFF ] | VIDEO2 | [ OFF ] | ||||
TUNER | [ OFF ] | TUNER | [ OFF ] | ||||
[ OFF ] | [ OFF ] | ||||||
CD | [ OFF ] | CD | [ OFF ] |
•OFF – 12 volt trigger is not activated for the selected component.
•ON – 12 volt trigger is activated for the selected component.
3Repeat for as many input functions as you would like to set.
4When you're finished, press RETURN.
You will return to the Other Setup menu.
67
En