Pioneer VSX-52TX manual AC outlet, Operating other Pioneer components, Power cord caution

03Connecting up

3-D view of 7.1 channel speaker setup	Power cord caution
	Handle the power cord by the plug. Do not pull out the
	plug by tugging the cord and never touch the power cord
	when your hands are wet as this could cause a short
	circuit or an electric shock. Do not place the unit, a piece
	of furniture, etc., on the power cord, or pinch the cord.
	Never make a knot in the cord or tie it with other cords.
	The power cords should be routed such that they are not
	likely to be stepped on. A damaged power cord can cause
	a fire or give you an electrical shock. Check the power
	cord once in a while. When you find it damaged, ask your
	nearest Pioneer authorized independent service
	company for a replacement.

AC outlet

Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

	AC OUTLET
	AC 120V 60Hz
	SWITCHED 100W(0 .8A) MAX
ND L	SURROUND BACK / B	L(Single)
	R
	SELECTABLE
	SELECTABLE

Operating other Pioneer components

Many Pioneer components have SR CONTROL jacks which can be used to link components together so that you can use just the remote sensor of one component. When you use a remote control, the control signal is passed along the chain to the appropriate component.

Note that if you use this feature, make sure that you also have at least one set of analog audio or video jacks connected to another component for grounding purposes.

		CONTROL
IN	OUT	IN
	CONTROL
		OUT

Receiver

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

Note

•This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation).

	Other Pioneer products
Remote	with CONTROL terminals
control	Connect to CONTROL
unit
	terminal of other
	Pioneer products

Note

•If you want to control all your components using this receiver’s remote control, refer to Controlling the rest of your system on page 50.

•If you have connected a remote control to the CONTROL IN jack (using a mini-plug cable), you won't be able to control this unit using the remote sensor.

22

En