Pioneer VSX-52TX LFE Attenuator Setup, SR+ Setup for Pioneer plasma displays, 11Other Settings

11Other Settings

Note

•This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

Tip

•While the receiver is in standby (using the front panel), press the STANDBY/ON button while holding down the TUNER EDIT button to change the dual mono setting.

LFE Attenuator Setup

• Default setting: ATT 0 dB

Some Dolby Digital and DTS audio sources include ultra- low bass tones. Set the LFE attenuator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers.

1Select ‘LFE ATT Setup’ from the Other Setup menu.

6.	Other Setup
[	a. DRC Setup	]
[	b. Dual Mono Setup	]
[	c. LFE ATT Setup	]
[	d. SR+ Setup	]
[	e . Multi Room Setup	]
[	f . 12V Trigger Setup	]

2 Choose the setting that you want.

6c. LFE ATT Setup

LFE ATT [ ATT 0dB ]

•ATT 0dB – No limiting (recommended setting)

•ATT 10dB – 10dB of limiting

•LFE OFF – No sound from LFE channel

3When you're finished, press RETURN. You will return to the Other Setup menu.

SR+ Setup for Pioneer plasma displays

Make the following settings if you have connected a Pioneer plasma display to this receiver using an SR+ cable. Note that the number of function settings available will depend on the plasma display you’ve connected.

See also Using this receiver with a Pioneer plasma display on page 60 and Using the SR+ mode with a Pioneer plasma display on page 61.

1 Select ‘SR+ Setup’ from the Other Setup menu.

6.	Other Setup
[	a. DRC Setup	]
[	b. Dual Mono Setup	]
[	c . LFE ATT Setup	]
[	d. SR+ Setup	]
[	e . Multi Room Setup	]
[	f . 12V Trigger Setup	]

2Select the ‘PDP Volume Control’ setting you want.

6d. SR+ Setup

PDP Volume Control

	[	OFF		]
PDP Input Select
DVD/LD		[ input-3 ]
TV/SAT	[		TV		]
DVR		[ input-1 ]
VIDEO1	[		OFF		]
VIDEO2	[		OFF		]
Monitor Out Connect
		[ input-2 ]

•OFF – The receiver does not control the volume of the plasma display

•ON – When the receiver is switched to one of the inputs that use the plasma display (DVD/LD, or another one of functions below), the volume on the plasma display is muted so only sound from the receiver is heard.

3Assign any input source connected to the plasma display to the corresponding input number.

This matches the receiver’s input source with a numbered video input on the plasma display. For example, assign DVD/LD to input-2if you have connected the your DVD video output to video input 2 on the plasma display.

•The Monitor Out Connect should be set to the input that you’ve used to connect this receiver to your plasma display.

6d. SR+ Setup				6d. SR+ Setup
PDP Volume Control				PDP Volume Control
	[ ON ]				[ ON ]
PDP Input Select				PDP Input Select
DVD/LD	[	input-3	]	DVD/LD	[	input-2	]
TV/SAT	[	TV	]	TV/SAT	[	TV	]
DVR	[ input-1 ]			DVR	[ input-1 ]
VIDEO1	[	OFF	]	VIDEO1	[	OFF	]
VIDEO2	[	OFF	]	VIDEO2	[	OFF	]
Monitor Out Connect				Monitor Out Connect
	[ input-2 ]				[ input-2 ]

4 When you're finished, press RETURN.

You will return to the Other Setup menu.

66

En