Pioneer VSX-52TX manual Using the SR+ mode with a Pioneer plasma display, Other connections

Other connections 10

•Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this receiver with the CONTROL OUT jack of your plasma display.

Before you can use the extra SR+ features, you need to make a few settings in the receiver. See SR+ Setup for Pioneer plasma displays on page 66 for detailed instructions.

VIDEO	Pioneer plasma	VIDEO
INPUT 1		INPUT 2
	display
DVD player	Satellite receiver, etc
DVD		TV/SAT
AUDIO IN		AUDIO IN

VSX-52TX

To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/ or digital) to this receiver.

Note

•The 3-ringed SR+ cable from Pioneer is commer- cially available under the part number ADE7095. Contact the Pioneer Customer Support division for more information on obtaining an SR+ cable (you can also use a commercially available 3-ringed mini phone plug for the connection).

Using the SR+ mode with a Pioneer plasma display

When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include:

•On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on.

•On-screen volume display.

•On-screen display of listening mode.

•Automatic video input switching on the plasma display.

•Automatic volume muting on the plasma display.

See also SR+ Setup for Pioneer plasma displays on page 66 for more on setting up the receiver.

RECEIVER	INPUT	SOURCE
	SELECT

DVD/LD		TV/SAT	DVR/VCR	TV CONT
		MULTI CONTROL
CD		CD-R/TAPE	TUNER	RECEIVER
INPUT ATT		FL DIMMER		SR
	+10			DISC
				ENTER
D.ACCESS				CLASS
TOP MENU				MENU
		TUNE
DTV MENU	ST		ST

1Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable.

See Using this receiver with a Pioneer plasma display above for more on connecting these components.

2To switch SR+ mode on/off, press RECEIVER, then the SR+ button.

The front panel display shows SR+ ON or SR+ OFF.

Note

•The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 66.

61

En