The System Setup menu
Crossover Network
• Default setting: 80Hz
This setting decides the cutoff between bass sounds playing back from the speakers selected as LARGE, or the subwoofer, and bass sounds playing back from those selected as SMALL. It also decides where the cutoff will be for bass sounds in the LFE channel.
Note
•For more on selecting the speaker sizes, see Speaker Setting above.
1Select ‘Crossover Network’ from the Manual SP Setup menu.
4. | Manual SP Setup |
|
[ | a . Speaker Setting | ] |
[ | b.Crossover Network | ] |
[ | c . Channel Level | ] |
[ | d . Speaker Distance | ] |
2Choose the frequency cutoff point. Frequencies below the cutoff point will be sent to the subwoofer (or LARGE speakers).
4b. Crossover Network
Frequency [ 80Hz ]
(THX Speaker = 80Hz)
3When you’re finished, press RETURN. You will return to the Manual SP Setup menu.
Note
•If you’re using a THX speaker setup, confirm that the crossover frequency is set to 80Hz.
06
Channel Level
Using the channel level settings, you can adjust the overall balance of your speaker system, an important factor when setting up a home theater system.
1Select ‘Channel Level’ from the Manual SP Setup menu.
4. | Manual SP Setup |
|
[ | a . Speaker Setting | ] |
[ | b . Crossover Network | ] |
[ | c . Channel Level | ] |
[ | d . Speaker Distance | ] |
2 Select a setup option.
4c. Channel Level | 4c. Channel Level | ||||||
Test Tone | [ |
| ] | Test Tone | [ |
| ] |
[ Auto ] | Manual | ||||||
| Enter : Next |
| Enter : Next | ||||
| Return : Cancel |
| Return : Cancel |
•Manual – Move the test tone manually from speaker to speaker and adjust individual channel levels.
•Auto – Adjust channel levels as the test tone moves from speaker to speaker automatically.
3Confirm your selected setup option.
The test tones will start after you press ENTER.
4c. Channel Level
Test Tone | [ | Manual | ] |
Setting Start
Please Wait
Caution!!
Test tone is
output loudly.
Return:Cancel
4Adjust the level of each channel using the (cursor left/right) buttons.
If you selected Manual, use (cursor up/down) to switch speakers. The Auto setup will output test tones in the order shown
4c. Channel Level |
|
|
|
Left | [ | + 0.5dB | ] |
Center | [ | 0.0dB] |
|
Right | [ | 0.0dB] | |
Surround R | [ | 0.0dB] | |
Surr Back R | [ | 0.0dB] | |
Surr Back L | [ | 0.0dB] | |
Surround L | [ | 0.0dB] | |
Sub Woofer | [ | 0.0dB] |
Return:Finish
Adjust the level of each speaker as the test tone is emitted.
45
En