10 – Display and Configuration (continued)
1
10-15 Manual Setup & Test Menu
•1 Enter the maintenance menu as described in Section
2the scroll buttons (
,
) to move the cursor to “MANUAL SETUP
& TEST”, then press the enter button (
).
3
4 •2 Use the scroll buttons (
,
) and the enter button (
) to select a menu choice.
5
6•3 Select “FORCE BOOST CHARGE” to boost the battery charge rate. You must enter the administrator password to confirm the operation. Warning: Boosting the battery charge rate for an extended period may damage the battery system.
7
8•4 Select “MANUAL BATTERY TEST” to initiate a battery test. You must enter the administrator password to confirm the operation.
9
10
•5 Select “BUZZER AND LED TEST” to initiate test of the control panel LEDs and audible alarm. You must enter the administrator password to confirm the operation.
11
12
•6 Select “CLR BAT TEST RESULT” to remove the battery test results from the “MEASURE” menu. (See Section
13 Note: Press the “ESC” button to return to the previous menu.
14
1
2
3
4
5
6
44
