Graco 24B596, 24B591 Pump OFF Setup, Cycle Mode Selection, To Set the Pump OFF Option

Setup

Cycle Mode Selection

If the Cycle Mode is selected you will also be prompted to set the desired number of cycles.

NOTE: A cycle is equal to two switch closure transitions at the cycle switch input.

FIG. 27

10.Use the Arrow keys to move the cursor over the CYCLES field.

11.Press ENTER.

12.Use the UP/DOWN arrows to move up and down through the numbers 0-9 until the first number you want in the CYCLES field is displayed.

13.Use the RIGHT arrow to move the cursor to the next field. Repeat step 12.

NOTE: The maximum number of Cycles you can setup in this field is 99.

14. Press RESET. The Main Screen, page 18 displays.

NOTE: When Cycles is selected, the Cycles Icon dis- plays is the upper right corner of the screen.

PUMP OFF Setup

Sets up how the PUMP OFF cycle is ended: Time, Machine Count switch activation, or Machine Count acti- vations limited by a maximum time.

FIG. 28

1.Use the UP/DOWN Arrow keys to move the cursor over PUMP OFF.

2.Press ENTER to display the PUMP OFF setup screen.

To Set the Pump OFF Option

FIG. 29

1.Use the Arrow keys to move the cursor over the PUMP OFF pull-down menu.

2.Press ENTER.

3.Use the UP/DOWN Arrow keys to move cursor to select TIME, COUNT or BOTH.

4.After you make your selection, Press ENTER.

20 313855H