![](/images/new-backgrounds/1148709/14870957x1.webp)
Run Mode
Run Mode
When you first turn the Lubrication Controller power on, the identification screen shown in FIG. 53 displays.
A
C D
A
B
C
D
FIG. 53 | B |
| FIG. 54 |
|
| ||
|
|
| |
|
|
|
|
ADisplay Contrast Adjustment: UP and DOWN Arrows can be used to adjust the display contrast.
BBacklight Brightness Adjustment: LEFT and RIGHT Arrows can be used to adjust the backlight brightness.
NOTE: Contrast and Brightness adjustments can be made on any Run Screen at any time.
CSoftware (Part Number): 15Y354
D(Software) Version: 1.01.XX
Screen Identification
The following screen is only shown as an example of the information that is displayed on a Run screen. A com- plete description of the icons and symbols shown in FIG. 54 is provided on page 3.
AOperating Mode Identification - Sets up Pump On/ Pump Off, page 22.
BTime Counter - Actual elapsed time counts down while the pump runs - set up in Pump On Setup, page 18.
CProgression Bar -
DTotal Pump On Time - Shows the total amount of time the pump is on. Setup on the Pump On setup screen, page 18.
313855H | 29 |