Graco 24B591, 24B596 important safety instructions PIN Setup, To enable PIN Code Entry

10.Use the Arrow keys to move the cursor over the TIME ON field.

11.Press ENTER.

NOTE: The time is displayed in Seconds.

12.Use the UP/DOWN arrows to move up and down through the numbers 0-9 until the first number of the TIME ON you are creating is displayed in the field.

13.Use the RIGHT arrow to move the cursor to the next field. Repeat step 7.

14.Press ENTER.

15.Press RESET. The Main Screen, page 18 displays. NOTE:

•The maximum Time Off and Time On is 99 seconds.

•The minimum Time Off is 3 seconds.

•The minimum Time On is 0 (zero) seconds.

Setup

To enable PIN Code Entry:

FIG. 44

1.Use the Arrow keys to move the cursor over the PIN pull-down menu.

2.Press ENTER.

3.Use the UP/DOWN Arrow keys to move cursor to select ON.

4.Press ENTER.

PIN Setup

If protection for the setup mode is desired, a PIN Code entry can be enabled.

FIG. 43

1.Use the UP/DOWN Arrow keys to move the cursor over PIN CODE.

2.Press ENTER to display the PIN CODE setup screen.

FIG. 45

5.Use the Arrow keys to move the cursor over the PIN CODE prompt field.

6.Use the LEFT/RIGHT arrow to position the cursor over the first blank Pin Code prompt field (FIG. 21).

7.Use the UP/DOWN arrows to move up and down through the numbers 0-9 until the first number in the PIN code you are creating is displayed in the field.

8.Use the RIGHT arrow to move the cursor to the next field. Repeat step 7

9.Repeat steps 7 and 8 for each PIN Code prompt.

10.Press RESET. The Main Screen, page 18 displays.

313855H 25