Sharp DM-3500, DM-4551, DM-3551, DM-3501, DM-4500 Saddle Stitch Finisher, Part names, Specifications

SADDLE STITCH FINISHER

If the saddle stitch finisher is installed, the offset function that stacks each set offset and the saddle stitch function that staples automatically at the center of paper and folds paper in two can be used. Also punching can be performed on printed paper if a punch unit is installed as a peripheral unit.

Part names

Stapler compiler

Paper to be stapled is stacked temporarily.

Offset tray

The offset function and the stapling function can be used only in this tray. Facsimile output is delivered to this tray.

Saddle stitch book tray

Paper on which saddle stitch has been made is output here.

Top cover

Open for misfeed removal.

Stapler section

Open the front cover and pull out this section to replace the staple cartridge or to remove jammed staples.

Front cover

Open to replace the staple cartridge or to remove jammed staples.

NOTES

●Do not put pressure on the saddle stitch finisher (particularly each tray).

●Be careful about the offset tray during printing because the tray moves up and down.

●Some other peripheral units may be needed for installation of the saddle stitch finisher and some peripheral units cannot be installed together with the saddle stitch finisher. For combination of the peripheral units, see the list of combination of peripheral units on page xxxx.

Specifications

Name	Saddle stitch finisher
Number of trays	2
Exit system	Print face down
Tray type	Upper tray: offset tray, Lower tray: saddle stitch book tray
Paper capacity	Upper tray: 1,000 sheets (8-1/2" x 11" or A4 size, 20 lbs. or 80 g/m2) or 500
	sheets (8-1/2" x 14" or B4 size or larger, 20 lbs. or 80 g/m2), Lower tray:
Paper size	Upper tray: max. 11" x 17" or A3, min. 5-1/2" x 8-1/2"R or A5R
	Lower tray: max. 11" x 17" or A3, min. 8-1/2" x 11"R or A4R

5

Paper weight	Upper tray: 15 to 54 lbs. or 56 to 205 g/m2
	Lower tray: 17 to 34 lbs. or 64 to 128 g/m2
Paper type	Upper tray:same as the specifications of paper for feeding in the main unit
	Lower tray:
Paper limit detection	Provided in the upper tray only
Offset function	Provided in the upper tray only, offset amount: xx inch (xx mm)
Paper size for stapling	Upper tray:11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 8-1/2" x 11"R, A3,
	B4, A4, A4R, B5, and B5R
	Lower tray:11" x 17", 8-1/2" x 11"R, A3, B4, and A4R
Stapling capacity	8-1/2" x 11" or A4 or smaller size: 50 sheets*(20 lbs. or 80 g/m2)
	8-1/2" x 14" or B4 or larger size: 25 sheets*(20 lbs. or 80 g/m2)
	*Up to two sheets of 34 lbs. or 128 g/m2 paper can be included as covers.

5-17