MISFEED REMOVAL
Misfeed in the duplex module
1 Pull out the duplex module. | 5 Gently close the duplex module. |
| |
Hold the knob and gently | After closing the duplex | ||
open the module. | module, confirm that the | ||
| misfeed | message | is |
| cleared | and that | the |
| normal display appears. | ||
Raise the exit tray and open the cover of
2 the duplex module.
If the duplex module is not equipped with an exit tray, the operation concerning the exit tray is not needed (steps 2 to 4).
While holding the exit tray up, remove the
3 misfed paper.
●If paper is misfed at the upper part of the duplex module:
Gently remove the misfed paper taking care not to tear the paper.
●If paper is misfed at the lower part of the duplex module:
Gently remove the misfed paper taking care not to tear the paper.
■Misfeed in the bypass tray
1 Remove the misfed from the bypass tray.
Be careful not to tear the misfed paper during removal.
4
Open and close the duplex module to clear 2 the misfeed message.
Close the cover of the duplex module and
4 return the exit tray.
