CUSTOM SETTINGS
Setting items
■Total count
The number of total printed pages in this product can be displayed and printed.
The displayed or printed items vary with installation of peripheral units.
■Display contrast
Can be set if this product is equipped with a scanner module as a peripheral unit.
This item is used to adjust the contrast of the touch panel display.
■List print
Test pages such as a list of setting items configured in this product and a list of the resident fonts for checking can be printed.
The types of test pages are shown below.
●Setting list print
The settings in the printer feature are printed.
●Printer test page
●Demonstration page printing: Demonstration pages contained in this product are printed.
●PCL font list printing: A list of fonts that can be used with the PCL printer drivers is printed.
●PCL symbol set printing: A PCL symbol set list is printed.
●NIC page printing: A list of settings used by the NIC (Network Interface Card), namely the print server card (peripheral unit), is printed.
●PostScript font list printing: A list of fonts that can be used with the PostScript printer driver is printed.
NOTE
If test page printing is disabled with key operator program “DISABLE TEST PAGE PRINTING” (page xx), the printer test pages cannot be printed.
■Clock
The date and time of the
This setting is needed for date and time information in
■Tray settings
Paper type, paper size, operation mode, and use of automatic tray switching are set for each tray.
The operation mode can be set when this product is equipped with a scanner module as a peripheral unit. If the product is not equipped with a scanner module, use the item “Auto tray switching” described below for setting the automatic tray switching function.
■Auto tray switching
This item can be set if this product is not equipped with a scanner module as a peripheral unit.
If the auto tray switching function is set and more
than one tray of the same paper size is installed in
this product, printing can be continued by switching 3 automatically the paper tray when paper of a tray runs out. This item is used to enable the auto tray switching function. If the product is equipped with a scanner module as a peripheral unit, use the item “Tray settings” to set this function.
