1 Introduction
Technical Specifications
Input voltage | 100 VAC to 240 VAC RMS |
Input frequency | 50/60 Hz |
Input current | 8 A @ 115 V at full load |
| 4 A @ 230 V at full load |
Output voltage at | 5 VDC @ 65 A |
maximum current | 21 VDC @ 0.5 A |
5 V regulation | ± 0.1% at full load |
5 V OVP | |
Dielectric strength, | 3750 VRMS per EN60950 |
input to output |
|
Indicator | LED for power good indication |
Environmental | Temperature range: |
| Humidity range: |
Dimensions | 7.3 cm × 17.1 cm × 29.8 cm (H × W × D) |
| 2.88 in.× 6.75 in.× 11.75 in. (H × W × D) |
Weight | 2.27 kg (5 lb) |
Limited Warranty | Two years |
Fuses | 12 A 250 V fast blow |
Manual Organization
Chapter 1 Introduction
This chapter describes the PS9600, gives its technical specifications, and provides a guide to the organization of the manual.
Chapter 2 Installation
This chapter describes how to install the PS9600 into the CommPlete chassis
Chapter 3 Operation
This chapter describes briefly how to operate the PS9600 power supply.
Chapter 4 Solving Problems
This chapter describes how to troubleshoot the PS9600 and adjust the output.
CommPlete Communications Server | 3 |
