before starting

1.Read all safety instructions at the beginning of manual.

2.Clean the light tower, removing dirt and dust, particularly the engine cooling air inlet and air cleaner.

3.Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required.

4.Check all fastening nuts and bolts for tightness.

WARNING

The engine's exhaust contains harmful emissions. ALWAYS ventilate the exhaust when operating inside tunnels, excavations or buildings. Direct exhaust away from nearby personnel.

Before starting the engine, make sure of the following:

„„The electrical load is disconnected and the main circuit breaker and all lamp circuit breakers are switched to the OFF position.

CAUTION

NEVER start the engine with any circuit breakers in the ON position.

„„Light tower is placed on secure level ground with chock blocks underneath each wheel to prevent the light tower from rolling.

„„Outriggers have been fully extended to prevent the trailer from tipping.

„„Light tower trailer support stands have been positioned properly and the trailer is level.

„„Lamps have been adjusted to desired position.

„„Chocked blocks have been positioned under each wheel to prevent trailer from rolling.

„„Light tower trailer frame has been grounded correctly. „„Lamps do not interfere with any overhead obstructions.

inspection

DANGER

ALWAYS make sure the area above light tower is open and clear of overhead power lines and other obstructions. The tower extends in excess of 30 ft. (9 meters). Contact with overhead power lines or other obstructions could result in equipment damage, serious injury or death!

„„Lamp power cables have been plugged into the appropriate receptacles (J1-J6) on the T-Bar assembly. Follow instructions below to correctly install the power cable plugs.

a.Locate the 6 (4 for the MLT20DCA) key-lock, 3-pin, female connectors on the T-bar. See Figure 4.

FRONT

REAR

LAMP 1

LAMP 4

LAMP 2

LAMP 5

LAMP 3

LAMP 6

T-BAR

MAST RAISED

 

 

J3

J2

J1

 

 

 

 

 

 

 

 

 

 

J6

J5

J4

 

 

 

 

 

 

 

 

 

 

 

FEMALE CONNECTORS

 

 

 

 

 

LOCKING NUT

 

 

 

 

 

(MALE CONNECTOR)

 

 

 

 

 

Figure 4. T-Bar and Cable Connectors

page 16 — MLT20 sERIES LIGHT TOWER • operation manual — rev. #0 (01/18/13)

Page 16
Image 16
Multi Tech Equipment MLT20DCA Inspection, Before starting, Read all safety instructions at the beginning of manual

MLT20DCA6, MLT20DCA specifications

The Multi Tech Equipment MLT20DCA and MLT20DCA6 stand out in the realm of compact construction machinery, renowned for their versatility and efficiency. These models are designed to meet the demanding needs of various industries, including construction, landscaping, and agricultural operations.

One of the key features of the MLT20DCA series is its powerful and reliable engine. Equipped with a robust diesel engine, these machines deliver optimal performance and fuel efficiency, ensuring that operators can complete tasks quickly and economically. This powertrain is complemented by a highly responsive hydraulic system, which allows for seamless operation of attachments such as buckets, forks, and augers.

The ergonomic design of the MLT20DCA and MLT20DCA6 enhances operator comfort and productivity. The spacious cabin is equipped with intuitive controls and offers excellent visibility, making it easier for operators to navigate tight spaces and perform intricate tasks. The low center of gravity provides stability and balance, which is essential when working on uneven terrain.

Both models feature a compact design, making them ideal for urban environments and confined job sites. Their versatile lifting capabilities allow them to handle a wide range of materials, from heavy loads to delicate items, making them invaluable in various applications. The MLT20DCA6 variant offers additional lifting height and capacity, catering to heavier-duty operations.

Safety is a paramount concern in equipment design, and the MLT20DCA series does not disappoint. These machines are equipped with multiple safety features, including reinforced ROPS (Roll Over Protective Structure), safety interlocks, and improved braking systems. This ensures the well-being of operators and those working in proximity.

In terms of technology, Multi Tech has integrated advanced control systems into both models. This includes automated diagnostics that monitor machine performance and alert users to potential issues before they become significant problems. Connectivity features also allow for remote monitoring, enhancing fleet management capabilities.

In summary, the Multi Tech Equipment MLT20DCA and MLT20DCA6 represent a formidable option for professionals seeking reliable and efficient compact machinery. With their powerhouse engines, user-friendly design, and advanced safety and technology features, these machines are poised to enhance productivity across various applications, ensuring a strong return on investment for operators.