inspection
b.Locate the key slot A on each female connector as shown in Figure 5.
MALE CONNECTOR
FEMALE CONNECTOR
KEY SLOT A | KEY TAB B |
|
Figure 5. Female and Male Connector
c.On the corresponding male connector, locate the key tab B as shown in Figure 5.
d.Align the key tab B on the male connector with the key slot A on the female connector and press together until seated.
e.Secure the connector by screwing the knurled locking nut of the male connector to the threaded portion of the female connector to ensure good
contact between the two connectors.
MLT20 SERIES LIGHT TOWER • operation manual — rev. #0 (01/18/13) — page 17
