
operation
TRAVELING
CAUTION
Make sure to follow all safety rules referenced in the safety section of this manual before operating compactor. Keep work area clear of debris and other objects that could cause damage to the compactor or bodily harm.
1.Grasp the compactor's hand grip, and move the engine throttle lever (Figure 18) quickly to the fast position.
2.With the throttle lever in the fast position, the engine speed should be around 3,600 RPM, therefore engaging the centrifugal clutch.
HAND
GRIP
FULL THROTTLE
POSITION
Figure 18. Throttle Lever (Fast)
NOTICE
ALWAYS move the throttle lever quickly without hesitation, because increasing the engine speed slowly causes the clutch to slip.
3.To make the compactor move in the forward direction push the travel lever ( Figure 19) forward.
TRAVEL
LEVER
NEUTRAL
REVERSE
FORWARD
Figure 19. Travel Lever
4.To make the compactor move in the reverse direction pull the travel lever ( Figure 19) backwards.
5.Firmly gasp the compactor's hand grip, the compactor will begin moving in the desired position when the direction lever has been placed in the desired position.
6.Slowly walk behind the compactor and be on the lookout for any large objects or foreign matter that might cause damage to the compactor or bodily injury.
7.If travel lever is placed in the neutral position, the machine will vibrate in place.
8.To move the compactor laterally, hold the hand grip firmly and swing compactor. DO NOT swing compactor while gripping the travel lever.
Normal Shutdown
1.Return the throttle lever to the START position (Figure 14). Allow the machine to cool down for 2 to 3 minutes.
2.Place the travel lever in the NEUTRAL position (Figure 20).
3.Place the throttle lever in the STOP position (Figure 20) to stop the engine.
TRAVEL
LEVER
NEUTRAL
POSITION
STOP
POSITION
THROTTLE
LEVER