BP-25H CE GASOLINEVIBRATOR — RULES FOR SAFE OPERATION
■NEVER run engine without air cleaner. Severe engine damage may occur.
■ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.
■ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using vibrator.
■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
■NEVER leave the vibrator unattended, turn off engine when unattended.
■Unauthorized equipment modifications will void all warranties.
■NEVER use vibrator near flammable or low flash point fluids. These fluids could ignite or explode.
■ALWAYS become familiar with the components of the vibrator before operating.
■ALWAYS replace nameplate, operation and safety decals when they become difficult to read.
■NEVER operate vibrator around corrosive chemicals or water containing toxic substances.These fluids could create serious health and environmental hazards. Contact local authorities for assistance.
■NEVER use accessories or attachments which are not recommended by the manufacturer for this equipment. Damage to the equipment and/or injury to user may result.
■Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties. Any modification which could lead to a change in the original characteristics of the machine should be made only by the manufacturer who shall confirm that the machine is in conformity with appropriate safety regulations.
■ALWAYS observe all applicable compulsory regulations relevant to environmental protection, especially, fuel storage, the handling of hazardous substances, and the wearing of protective clothing and equipment. Instruct the user as necessary, or, as the user, request this information and training.
Maintenance Safety:
■NEVER lubricate components or attempt service on a running machine.
■ALWAYS allow the vibrator a proper amount time to cool before servicing.
■Keep the machinery in proper running condition.
■Fix damage to the machine immediately and always replace broken parts.
■Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.
■DO NOT use food or plastic containers to dispose of hazardous waste.
■DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.
TRANSPORTING
■ALWAYS shutdown engine before transporting.
■Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling.
■ALWAYS use proper lifting techniques when using or moving the vibrator motor (backpack), flexible shaft, or vibrator head assembly.
EMERGENCIES
■ ALWAYS know the location of the nearest fire extinguisher.
■ALWAYS know the location of the nearest first aid kit.
■ In emergencies always know the location of the |
|
|
|
nearest phone or keep a phone on the job site. |
|
|
|
Also know the phone numbers of the nearest | 1 | 2 | 3 |
ambulance, doctor and fire department. This | 4 | 5 | 6 |
7 | 8 | 9 | |
information will be invaluable in case of an | * | 0 | # |
|
|
|
emergency.
FIRE
DEPARTMENT
■NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.
PAGE 10 —
