Multiquip DCA-800SSK - GENERATOR OUTPUTS, Generator OutputVoltages, Voltage Change-Over Board

DCA-800SSK — GENERATOR OUTPUTS

Generator OutputVoltages

A wide range of voltages are available to supply voltage for many different applications. Voltages are selected by apply- ing jumpers (6) to the voltage change-over board (Figure 15). To obtain some of the voltages as listed in Table 7 (see below) will require a fine adjustment using the voltage regu- lator (VR) control knob located on the control panel.

Voltage Change-Over Board

The voltage change-over board (Figure 15) is located on the control box, behind the generator control panel. This board has been provided for ease of voltage selection.

Generator Amperage

Tables 8 and 9 describe the generator’s current output capa- bility for both 1Ø-phase and 3Ø phase applications.

Table 8. Generator Ampere Ratings — 1Ø

KW	139V	240V	277V	480V
40	208	120	104	60
100	519	301	261	150
160	831	481	417	241
220	1,142	662	573	331
280	1,454	842	730	421
340	1,765	1,022	886	511
400	2,077	1,203	1,042	601
460	2,388	1,383	1,199	692
520	2,700	1,564	1,355	782
580	3,011	1,744	1,511	872
640	3,323	1,925	1,667	962

Figure 15. Voltage Change-Over Board 240V Configuration

CAUTION - CHANGING JUMPER PLATES

NEVER attempt to place jumper plates on the voltage change-over board while the generator is in operation. There exists the possibility of electrocution, electrical shock or burn, which can cause severe bodily harm or even death!

Table 7. Generator Available Voltages

Three-Phase 208V 220V 240V 416V 440V 480V

Table 9. Generator Ampere Ratings — 3Ø

KW	240V	480V
40	120	60
100	301	150
160	481	241
220	662	331
280	842	421
340	1,022	511
400	1,203	601
460	1,383	692
520	1,564	782
580	1,744	872
640	1,925	962

Single-Phase

120V 127V 139V 240V 254V 277V

PAGE 36 — DCA-800SSK (STD) — OPERATION AND PARTS MANUAL — REV. #4 (06/03/10)