EM -900SDCE MIXER — INITIAL START-UP

This section is intended to assist the operator with the initial start-up of the EM-900SDCE mixer.It is extremely important that this section be read carefully before attempting to use the mixer in the field.

DO NOT use your mixer until this section is thoroughly understood.

CAUTION

Failure to understand the operation of the EM-900SDCE mixer could result in severe damage to the mixer or personal injury.

STARTINGTHE ENGINE

The following steps outline the procedure for starting the engine.

1.Make sure the clutch engagement lever is in the dis-engage position (lever is pointing towards the engine end).

2PUSH the "RED" button (Figure 9) on the throttle control and pull the round black knob about halfway out. Make sure that the throttle lock knob has been dis-engaged.

PUSH-IN, THEN PULL

TO SET THROTTLE

(RPM’s)

THROTTLE LOCK

KNOB, TURN CLOCKWISE

TO LOCK THROTTLE CABLE.

THROTTLE RELEASE

PUSH ALL THE DOWN

AND STOP BUTTON

TO STOP ENGINE

Figure 9. Throttle Control Knob

6.Pull the starter grip (Figure 10) lightly until you feel resistance, then pull briskly. Return the starter grip gently.

7.Push the clutch engagement lever forward (Figure 11), toward the tow end of the mixer.When engine starts adjust throttle lever so that paddle shaft inside mixer rotates between 30 - 40 RPM's. The number of RPM's will vary depending on engine type and load.

Figure 11. Clutch Engagement Lever

MIXING

1.The paddle shaft inside the drum should be rotating at this time.

2.Lift the mixing bag compound onto the steel grate over the bag cutter and let the contents fall into the drum.

3.Add water, and mix compound to desired consistency,

Be sure to stand clear of the dump handle when the mixer is

operational. Any binding of material

NOTE between the mixer blades and the drum will cause the drum handle to move to the discharge position, thus causing bodily harm.

STOPPINGTHE ENGINE

1.Place the clutch engagement lever in the dis-engage position (lever is pointing towards the engine end).

2.PUSH the "RED" throttle button halfway in (idle speed). Allow the engine to cool for 3-5 minutes.

3.PUSH the "RED" throttle button all the way in, this will stop the engine.

Figure 10. Starter Grip

PAGE 18 — MULTIQUIP EM-900SDCE — OPERATION AND PARTS MANUAL — REV. #2 (09/14/07)

Page 17 Page 19
Page 18
Image 18
Multiquip EM-900SD Startingthe Engine, Mixing, Add water, and mix compound to desired consistency, Stoppingthe Engine
Page 17 Page 19

EM-900SD specifications

The Multiquip EM-900SD is a robust and highly efficient industrial generator designed to deliver reliable power for various applications. Known for its durability and versatility, this generator is ideal for construction sites, events, and emergency backup solutions. Equipped with a powerful engine and advanced features, the EM-900SD addresses the needs of professionals seeking a dependable power source.

One of the standout features of the EM-900SD is its impressive power output. With a maximum power rating of 900 watts, this generator ensures that users can operate multiple devices and tools simultaneously without any drop in performance. It incorporates a highly efficient engine that provides excellent fuel economy, enabling long operation times on a single tank of fuel. This is particularly beneficial for those working in remote locations where access to refueling may be limited.

In terms of technology, the EM-900SD is equipped with a digital inverter system. This innovative feature provides clean and stable power, making it suitable for sensitive electronic devices such as laptops and medical equipment. The inverter technology also minimizes harmonic distortion, ensuring that the power delivered is both safe and efficient. Additionally, the generator boasts a quiet operation, making it an excellent choice for noise-sensitive environments.

The construction of the EM-900SD is built to withstand tough working conditions. It features a robust frame and durable components designed to endure the rigors of job sites. The generator is also designed for easy transport, with a lightweight and compact design that allows it to be moved effortlessly. Furthermore, it has an intuitive control panel that provides users with easy access to essential functions such as power output monitoring and fuel level indicators.

Safety is a priority in the EM-900SD's design. It incorporates several safety features including overload protection and automatic shutoff systems that prevent potential damage to the generator or connected devices. This ensures peace of mind for users, knowing that they are operating within safe parameters.

Overall, the Multiquip EM-900SD stands out as a premier choice for those in need of a reliable and efficient power solution. With its blend of performance, technology, and safety, it meets the demands of a wide range of applications, making it an indispensable tool for professionals in various industries. Whether in construction, outdoor events, or as a backup power source, the EM-900SD delivers exceptional value and reliability.
Top Page Image Contents