Manuals / Multiquip / Power Tools / Saw

Multiquip FS 1 operation manual Dry Saw Operation, Finishing a Cut, Diamond Blades and Blade Speed

Models: FS 1

1 56
Download 56 pages 21.01 Kb
Page 28
Image 28

FS 1 CONCRETE SAW — OPERATION

Dry Saw Operation

WARNING

The operator must wear the appropriate protective equipment and clothing while engaged in sawing.

1.Ensure the proper DRY Cutting blade is selected for the job.

2.The preferred method of sawing is to step cut in increments of 2” (51 mm). “ Step-cutting” provides the optimum opportu- nity for the blade to cut fast and last its longest. Airflow acts as a blade coolant during sawing. Cutting too deep with one pass, or exerting excessive forward/side-ward pressure may damage the blade.

Finishing a Cut

1.Raise the blade out of the cut by utilizing the ball handle

adjustment assembly. Raise the blade high enough out of the cut to clear the surface and allow the saw to be maneu- vered.

2.Move the engine throttle lever to the idle (SLOW) position (Figure 20).

3.Set the engine ON/OFF switch to the “OFF” position (Figure 18).

4.Place the two-way water valve (Figure 6) in the “OFF” position .

WARNING

Engine components can generate extreme heat.

Diamond Blades and Blade Speed

1.Diamond Sawing consists of cutting WET or DRY.

2.Matching the correct blade for the specific job and material being cut optimizes performance and value.

3.Selection of the proper diamond blade consists of:

zDetermining WET or DRY cutting

zMaterial to be Cut

zType of Saw Being Used

zHorsepower of Saw

zHardness Characteristics of the Material

zPerformance Expectations

4.Selecting the “grade” of diamond blade often defines the performance factors that can be achieved. Multiquip offers a variety of diamond blade grades to provide the desired level of valve and performance.

Blade Speed

1.A diamond blade’s performance is directly connected to specific peripheral (rim) speeds.

2.The following shaft rotational speeds have been factory set to ensure optimum blade performance.

zFS 1 14” Capacity-3,200 RPM.

zFS 1 18” Capacity-2,700 RPM.

WARNING

Operating saw blades at rotational speeds greater than those specified by the manufac- ture can cause blade damage, and may in- jure the user or others in the operating area.

PAGE 28 — MQ-WHITEMAN FS1 CONCRETE SAW — PARTS & OPERATION MANUAL — REV. #3 (04/24/03)

Page 27 Page 29
Page 28
Image 28
Multiquip FS 1 operation manual Dry Saw Operation, Finishing a Cut, Diamond Blades and Blade Speed
Page 27 Page 29

FS 1 specifications

The Multiquip FS 1 is a versatile piece of equipment designed for efficient fuel management and transfer. Catering primarily to construction sites, agriculture, and industrial applications, the FS 1 is known for its compact design, robust performance, and reliable functionality.

One of the main features of the Multiquip FS 1 is its high-capacity fuel tank, which is engineered to hold a substantial volume of diesel or gasoline, allowing users to refuel equipment without frequent interruptions. This fuel tank is equipped with a durable, weather-resistant cover that ensures protection against various environmental factors, extending the life of the equipment.

In terms of technology, the FS 1 incorporates advanced pumping systems that facilitate rapid fuel transfer. The pump is designed for low noise operation, reducing disturbances on job sites while ensuring efficient fuel flow. Furthermore, the inclusion of an automatic shutoff feature ensures safety during fueling operations by preventing overflows and spills, thus minimizing environmental risks.

The FS 1 is characterized by its mobility. Equipped with sturdy wheels and a reliable tow hitch, it can be easily transported from one location to another, simplifying the logistics of fuel distribution on-site. This portability is particularly beneficial in large construction projects where multiple machines require fueling at varied intervals.

Ergonomically designed, the FS 1 features user-friendly controls that simplify operation. Operators can easily manage fuel transfers, check gauge readings, and monitor flow rates without extensive training. Additionally, the FS 1 is designed to be compatible with various fuel nozzles, making it a versatile choice for different fueling needs.

The construction of the FS 1 emphasizes durability and longevity. Built with high-quality materials, it is resistant to corrosion and wear, making it suitable for demanding environments. The design also prioritizes ease of maintenance, with accessible components that allow for quick inspections and repairs.

In summary, the Multiquip FS 1 stands out for its combination of efficiency, safety, and mobility. It is an essential tool for professionals who require a reliable fuel management solution that is easy to operate and maintain. With its innovative design and advanced features, the FS 1 simplifies the fueling process, allowing users to focus on their core tasks and enhancing overall productivity on the job site.