GA-6H/GA-6HA — CONTROLS AND INDICATORS

Figure 3A. Generators Components

1.

Lifting Bail Eye – Attach a rope or chain to this lifting eye

 

when lifting of the generators is required. Never stand

 

underneath the generators while it is being lifted. Place

 

lifting eye in down position when not in use.

2.

AC-Voltmeter – This voltmeter indicates (with a mark) the

 

rated 60 Hz (single-phase) output voltage. In addition the

 

voltmeter can also be used as a diagnostic tool. If the

 

voltmeter indicator (needle) is below the rated voltage,

 

engine problems may exist (low/high RPM's). To prevent

 

damage to the generators or power tools turn the generators

 

OFF and consult your authorized Multiquip service dealer.

3.

Idle Control Switch – The generators are provided with

 

an automatic idle control device for noise suppression and

 

reduced fuel consumption. The automatic idle control

 

automatically engages under a no-load condition. With the

 

automatic idle control switched “ON”, the engine revolutions

 

will automatically drop to about 2600 rpm (low-speed

 

operation) within 3 seconds after the load stops. When the

 

operation is resumed, the engine speed is automatically

 

increased to about 3600 rpm (high-speed operation) as

 

soon as the load is connected.

4.

Operation Switch – Place this rocker switch in the "ON"

 

position (up) for normal operation.To turn-off the generators,

 

place the operation switch in the "OFF" position (down).

5.GFCI Duplex Receptacle – NEMA 5-20R, GFCI receptacle will provide 120V, 20 amps. (GA-6HA has two.)

6.

120V Output Receptacle – NEMA L5-20Rtwist-lock

 

receptacle will provide 120V, 20 amps, 60 Hz.

7.

120V Output Receptacle – NEMA L5-30Rtwist-lock

 

receptacle will provide 120V, 30 amps, 60 Hz.

8.

120V/240V Output Receptacle – NEMA L14-30R twist-

 

lock receptacle will provide (120V, 50 amps, or 240V,

 

25 amps, 60 Hz.)

9.

Main Breaker – This 2-pole circuit breaker (120/240V, 21

 

amps) protects the generators from short circuiting or

 

overloading. When starting the generators always have

 

the circuit breaker placed in the "OFF" position.

10.

Ground – This ground connection point should be

 

connect to a good earth ground (ground rod)

GA-6H/GA-6HA A.C. GENERATORS — OPERATION & PARTS MANUAL — REV. #0 (06/02/05) — PAGE 17

Page 16 Page 18
Page 17
Image 17
Multiquip ga-6h manual GA-6H/GA-6HA Controls and Indicators, Generators Components
Page 16 Page 18

ga-6h, GA-6HA specifications

The Multiquip GA-6HA is a versatile and robust generator designed to meet the power needs of a variety of applications, particularly in construction, events, and emergency backup situations. With its compact design and impressive performance capabilities, the GA-6HA is an ideal choice for professionals and contractors who require reliable electrical supply in remote locations or during power outages.

One of the standout features of the GA-6HA is its powerful 6,000-watt output, which provides sufficient power to run multiple tools and equipment simultaneously. This generator is equipped with a Honda GX390 engine, known for its durability and fuel efficiency. The engine operates quietly, making it suitable for use in noise-sensitive environments. Furthermore, the advanced design of the engine ensures minimal emissions, aligning with environmental regulations and promoting cleaner operation.

In terms of technology, the GA-6HA is fitted with a heavy-duty alternator that delivers stable power with a rated output of 120/240 volts. This feature allows users to connect various electrical devices without worry of voltage fluctuations that could damage sensitive equipment. The generator also incorporates a manual reset circuit breaker for added safety, preventing overload conditions.

Durability is a significant characteristic of the GA-6HA, as it is built with a rugged steel frame that can withstand the rigors of outdoor use. The generator's design includes an integrated lift hook for easy transport and positioning on job sites. Additionally, the anti-vibration mounts help to minimize noise and maintain stability during operation.

The GA-6HA features multiple outlets, including 120V 20A duplex receptacles and a 120/240V 30A locking receptacle, providing flexibility for connecting various tools and appliances. An easy-to-read fuel gauge and easy-access control panel contribute to user-friendliness and operational efficiency.

Overall, the Multiquip GA-6HA is designed to be a reliable power solution, effectively combining performance, durability, and portability. Whether for construction sites, outdoor recreational activities, or emergency power needs, this generator stands out for its impressive features and user-centric design.
Top Page Image Contents