Manuals / Multiquip / Household Appliance / Window

Multiquip HTN-27K-TCSL Trowel Pre-Set Up Instructions, Control Handle Assembly, Seat Assembly

Models: HTN-27K-TCSL

1 46
Download 46 pages 4.37 Kb
Page 21
Image 21

HTN-SERIES — NEW MACHINE SETUP INSTRUCTIONS

Trowel Pre-Set Up Instructions

The purpose of this section is to assist the user in setting up a NEW trowel. If your trowel is already assembled, (seat, handles, knobs and battery), this section can be skipped.

The new trowel cannot be put into service until the pre-setup installation instructions are completed. These

NOTE pre-setup instructions only need to be performed at the time of unpacking a NEW trowel.

Before packaging and shipping, this HTN SERIES Ride-On Power Trowel was run and tested at the factory. If there are problems, please let us know.

Control Handle Assembly

The steering control handles are not attached to the trowel's two lower handles at the time of shipment. To attach the steering control handles to the two lower handle assemblies perform the following:

1.Remove the bolts from the plastic bag tied to the control towers.

2.Remove all protective wrapping and straps from the control handles.

3.Slip the top (loose) piece into the base of the corresponding handle, making sure to line up the holes.

4.Install the bolt through the lined up holes and tighten the acorn nut onto the threaded end.

Seat Assembly

The seat is not installed on the trowel for shipping purposes. To attach the seat perform the following:

There are two types of seats,

NOTE

depending on what type of trowel

 

 

you have. J and B series trowels have

slots on the seat mounting plate that allow fore and aft adjustment of the seat. H-series trowels have a seat that is mounted on tracks,

similar to an automobile seat. This seat can be adjusted fore and aft via the control lever under the front of the seat.

1.Remove the seat from the protective wrapping.

2.Remove the bolts on the bottom of the seat, and place seat on the seat mounting plate, then insert the bolts through the holes or slots on the seat mounting plate and tighten.

Battery Setup

This trowel was shipped with a wet charged battery.This battery may need to be charged for a brief period of time as per the manufacturer instructions.

CAUTION

Use all safety precautions specified by the battery manufacturer when working with the battery. See further specific safety information on page 12 of this manual.

Some models are equipped with

To install the battery on the trowel, make sure that the battery is well seated in the battery box.. Connect the positive cable to the

NOTE

adjustable height handles. Adjust the height by placing the bolt through the set of holes that corresponds to the most comfortable height.

positive terminal on the battery first, then connect the negative cable to the negative terminal. Close the plastic battery box cover and secure the battery box.

5.Pay close attention to any wires that may be inside the control handles. DO NOT pinch or cut any wires during installation.

6.Inside the plastic bag of parts are two knobs for the pitch control tower cranks. Install these two knobs onto the tower crank levers.

HTN- SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (06/06/07) — PAGE 21

Page 20 Page 22
Page 21
Image 21
Multiquip HTN-27K-TCSL Trowel Pre-Set Up Instructions, Control Handle Assembly, Seat Assembly, Battery Setup
Page 20 Page 22

HTN-27K-TCSL specifications

The Multiquip HTN-27K-TCSL is a cutting-edge piece of technology designed for professionals in the construction and industrial sectors. This portable hydraulic power unit is known for its robust performance and versatility, making it an ideal choice for a wide range of applications.

One of the standout features of the HTN-27K-TCSL is its powerful engine. Equipped with a reliable 27-horsepower Kohler engine, this unit ensures maximum efficiency and performance, allowing operators to complete tasks quickly and effectively. The engine is designed to be both fuel-efficient and environmentally friendly, adhering to emission regulations without sacrificing power.

The HTN-27K-TCSL boasts a unique hydraulic system that delivers high-pressure flow rates, making it suitable for operating multiple tools simultaneously. With a maximum hydraulic pressure of 3,000 PSI, this power unit can effortlessly handle demanding tasks such as concrete breaking, water jetting, and other heavy-duty applications. The ability to provide consistent hydraulic power allows for enhanced productivity on job sites.

In terms of versatility, the Multiquip HTN-27K-TCSL is equipped with a wide range of output options. Its hydraulic outlet configurations can support various attachments, enabling users to adapt the unit for diverse tasks. This flexibility makes it an invaluable tool for contractors, landscapers, and utility companies.

Another notable characteristic of the HTN-27K-TCSL is its rugged construction. Built to withstand the rigors of tough job sites, this hydraulic power unit features a durable frame and protective covers that shield the engine and components from dust and debris. The compact design ensures easy transportation and maneuverability, making it a practical choice for both indoor and outdoor use.

Additionally, the HTN-27K-TCSL is designed with operator safety in mind. It features a user-friendly interface, with clearly labeled controls for easy operation. Safety features such as emergency shut-off switches and protective guards further enhance its usability, ensuring that operators can work confidently.

In summary, the Multiquip HTN-27K-TCSL is a powerful, versatile, and robust hydraulic power unit designed to meet the demanding needs of various industries. With its exceptional performance, durable construction, and focus on safety, it continues to be a trusted choice among professionals seeking reliable hydraulic solutions.