Manuals / Multiquip / Household Appliance / Window

Multiquip HTN-27K-TCSL Changing Engine Oil And Filter, Oil Filter 100 Hours, Oil And Fuel Lines

Models: HTN-27K-TCSL

1 46
Download 46 pages 4.37 Kb
Page 28
Image 28

Changing Engine Oil And Filter

1.Change the engine oil after the first 5 hours of use, then change every 6 months or 100 hours.

2.Remove the oil filler cap (Figure 12, Item 5), and fill engine crankcase with recommended type oil as listed in Table 4. Fill to the upper limit of dipstick.

3.Crankcase oil capacity with oil filter replacement is 2.02 qts. (1.90 liters).

Oil Filter (100 Hours)

1.Replace the engine oil filter (Figure 14) every oil change or 100 hours.

Figure 14. Oil Filter

2.Be sure to coat the seal of the new oil filter with clean engine oil.

Fuel Filter (200 Hours)

■Replace the engine fuel filter (Figure 15) every 200 hours.

HTN-SERIES — MAINTENANCE

Oil And Fuel Lines

■Check the oil and fuel lines and connections regularly for leaks or damage. Repair or replace as necessary.

■Replace the oil and fuel lines every two years to maintain the line's performance and flexibility.

Long Term Storage

■Remove the battery.

■Drain fuel from fuel tank, fuel line and carburetor.

■Remove spark plug and pour a few drops of motor oil into cylinder. Crank engine 3 to 4 times so that oil reaches all internal parts.

■Clean exterior with a cloth soaked in clean oil.

■Store unit covered with plastic sheet in moisture and dust- free location out of direct sunlight.

CAUTION

Never store the ride-on trowel with fuel in the tank for any extended period of time. Always clean up spilled fuel immediately.

Engine Tune-Up

■See your engine manual for specific information on tuning up your engine, checking and gaping the spark plugs, etc.

See the engine manual supplied with

NOTE your machine for appropriate engine maintenance schedule and troubleshooting guide for problems.

Figure 15. Fuel Filter (Typical)

At the front of the book (Page 6) there is a “Daily Pre-Operation

Checklist”. Make copies of this checklist and use it on a daily

 

 

basis.

 

Disconnect spark plug wires and battery cables before attempting

 

any service or maintenance on the ride-on trowel.

HTN-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #0 (06/06/07) — PAGE 28

Page 27 Page 29
Page 28
Image 28
Multiquip HTN-27K-TCSL Changing Engine Oil And Filter, Oil Filter 100 Hours, Fuel Filter 200 Hours, Oil And Fuel Lines
Page 27 Page 29

HTN-27K-TCSL specifications

The Multiquip HTN-27K-TCSL is a cutting-edge piece of technology designed for professionals in the construction and industrial sectors. This portable hydraulic power unit is known for its robust performance and versatility, making it an ideal choice for a wide range of applications.

One of the standout features of the HTN-27K-TCSL is its powerful engine. Equipped with a reliable 27-horsepower Kohler engine, this unit ensures maximum efficiency and performance, allowing operators to complete tasks quickly and effectively. The engine is designed to be both fuel-efficient and environmentally friendly, adhering to emission regulations without sacrificing power.

The HTN-27K-TCSL boasts a unique hydraulic system that delivers high-pressure flow rates, making it suitable for operating multiple tools simultaneously. With a maximum hydraulic pressure of 3,000 PSI, this power unit can effortlessly handle demanding tasks such as concrete breaking, water jetting, and other heavy-duty applications. The ability to provide consistent hydraulic power allows for enhanced productivity on job sites.

In terms of versatility, the Multiquip HTN-27K-TCSL is equipped with a wide range of output options. Its hydraulic outlet configurations can support various attachments, enabling users to adapt the unit for diverse tasks. This flexibility makes it an invaluable tool for contractors, landscapers, and utility companies.

Another notable characteristic of the HTN-27K-TCSL is its rugged construction. Built to withstand the rigors of tough job sites, this hydraulic power unit features a durable frame and protective covers that shield the engine and components from dust and debris. The compact design ensures easy transportation and maneuverability, making it a practical choice for both indoor and outdoor use.

Additionally, the HTN-27K-TCSL is designed with operator safety in mind. It features a user-friendly interface, with clearly labeled controls for easy operation. Safety features such as emergency shut-off switches and protective guards further enhance its usability, ensuring that operators can work confidently.

In summary, the Multiquip HTN-27K-TCSL is a powerful, versatile, and robust hydraulic power unit designed to meet the demanding needs of various industries. With its exceptional performance, durable construction, and focus on safety, it continues to be a trusted choice among professionals seeking reliable hydraulic solutions.