MP2 MASONRY SAW — RULES FOR SAFE OPERATION

Safety - Electric Powered Models

■ALWAYS connect the motor to a power source in compliance with all local electrical codes. This must be performed by a licenced electrician.

■ALWAYS use only outdoor approved GROUNDED extension cords.

■MAKE CERTAIN the power cord/extension cord is free from damage and that the grounding circuit is operational.

■MAKE CERTAIN the extension cord used is intended to be used in the environment you will be using it in. If an extension is used, NEVER submerge the connection in water. To reduce the risk of electrical shock, always make water-tight connections.

■MAKE CERTAIN the "ON/OFF" switch is in the "OFF" position before plugging in the power cord/extension cord to avoid accidental starting.

■ALWAYS stop the motor before servicing. MAKE CERTAIN the motor is stopped and turned "OFF" at the switch, and the power cord is disconnected from the power source.

■Use only the guage wire and length of cord recommended for the motor size.

■When cutting, ALWAYS be aware of the location of the cord.

General Safety

■ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment.

■ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw.

■NEVER leave the machine unattended while running.

■Block the unit when leaving or when using on a slope.

■ALWAYS check to make sure that the operating area is clear before starting the engine.

■Maintain this equipment in a safe operating condition at all times.

■AVOID wearing jewelry or loose fitting clothing that may snag on the controls or moving parts, this can cause a serious injury.

■ALWAYS keep clear of rotating or moving parts while operating the saw.

■ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

■NEVER use accessories or attachments which are not recommended by the manufacturer for this equipment. Damage to the equipment and/or injury to user may result.

WARNING - Clear Area Of Obstructions

ALWAYS check to make sure that the operating area is clear before starting the engine.

Blade Safety

■Use appropriate blades manufactured for use on masonry saws.

■Always inspect blades before each use. The blade should exhibit no cracks, dings, or flaws in the steel centered core and/or rim. Center (arbor) hole must be undamaged and true.

■Examine blade flanges for damage, excessive wear and cleanliness before mounting blade. Blade should fit snugly on the shaft and against the inside/outside blade flanges.

■Ensure the blade is marked with an operating speed greater than the blade shaft speed of the saw.

■Only cut the material that is specified by the blade. Read the specifications of the blade to ensure the proper tool has been matched to the material being cut.

■Always keep blade guards in place. Exposure of the blade must not exceed 180 degrees.

■NEVER touch or try to stop a moving blade with your hands. ALWAYS keep hands clear of the blade.

MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (3/12/13) — PAGE 11

Page 10 Page 12
Page 11
Image 11
Multiquip MP2090HP MP2 Masonry SAW Rules for Safe Operation, Safety Electric Powered Models, General Safety, Blade Safety
Page 10 Page 12

MP2090HP, MP2050E3, MP2050E1 specifications

The Multiquip MP2050E1, MP2050E3, and MP2090HP are powerful and versatile electric-powered concrete and masonry saws designed for a variety of cutting applications. Built with durability and performance in mind, these models cater to the needs of professional contractors, offering exceptional efficiency and precision in both residential and commercial projects.

The MP2050E1 features a high-torque electric motor that ensures reliable operation and consistent cutting performance. It comes equipped with a 20-inch blade capacity, allowing users to tackle medium to large-sized jobs with ease. The saw is designed with an ergonomic handle and adjustable height for optimal user comfort during extended use. Additionally, the MP2050E1 boasts a compact design, making it easy to transport and maneuver around job sites.

On the other hand, the MP2050E3 is an upgraded version that incorporates advanced features while maintaining the same blade capacity as its predecessor. This model includes a three-phase motor, which enhances power efficiency and increases the saw's longevity. The MP2050E3 is engineered with a robust chassis for increased stability during operation, and it also offers improved dust management capabilities to keep the work area clean and safe.

The Multiquip MP2090HP stands out with its higher horsepower motor, optimizing productivity for heavy-duty cutting tasks. This model supports a larger blade size of up to 30 inches, making it ideal for cutting thicker materials. The MP2090HP is equipped with a sophisticated water control system that ensures consistent cooling of the blade, preventing overheating and prolonging blade life. Its heavy-duty construction is designed to withstand the rigors of demanding job sites, offering maximum reliability.

All three models utilize cutting-edge technology, including adjustable cutting depth settings, which allow operators to customize their cutting depth for precision and versatility. They also feature high-performance bearings that provide smooth blade rotation, enhancing overall cutting efficiency.

In summary, the Multiquip MP2050E1, MP2050E3, and MP2090HP are exemplary tools for professionals in the concrete and masonry industry. Each model boasts unique features tailored to meet varying job requirements, while their advanced technologies ensure high performance, safety, and ease of use. Whether tackling small renovations or large construction projects, these saws provide the reliability and power needed to achieve exceptional results.
Top Page Image Contents