Manuals / Multiquip / Lawn and Garden / Pole Saw

Multiquip MP2090HP, MP2050E1, MP2050E3 manual MP2 Masonry SAW Maintenance SAW

Models: MP2090HP MP2050E3 MP2050E1

1 42
Download 42 pages 11.3 Kb
Page 29
Image 29

MP2 MASONRY SAW — MAINTENANCE (SAW)

Maintenance

A good preventive maintenance program of regular inspection and care will increase life and improve the performance of the saw and cutting blades.

WARNING - Shut-down the Saw for Maintenance

Whenever cleaning, adjusting, or lubricating any part of the saw, MAKE CERTAIN to do the following:

Electric Powered Saws

■Place power ON/OFF switch to the OFF position.

■Disconnect power cord from AC source.

■NEVER attempt to check the V-belt with the engine running. Severe bodily injury can occur.

Gasoline Powered Saws

■Turn the engine switch to the OFF position, disconnect the spark plug wire and secure it away from the spark plug.

■NEVER attempt to check the V-belt with the engine running. Severe bodily injury can occur.

Basic Maintenance

1. Tighten loose nuts or screws and replace any cracked or broken parts.

2.Clean the machine frequently. Remove the belt guard and clean the pulleys. The belts and pulleys will wear rapidly if excessive dust builds up.

3.Clean the sludge that accumulates on the bottom of the water tray at least once a day and refill with clean water. It may be necessary to clean the tray out twice a day in heavy cutting. The sludge is abrasive and will shorten the life of the water pump and blades.

4.After each day's use, clean the sludge from the bottom of the tray and run clean water through the water pump and water hoses. This extends pump and blade life.

5.Lubricate the blade adjustment rod after every eight

(8) hours of use.

6.Check the spindle bolt for tightness periodically.

7.Keep the drive belts tight. It is very important to replace worn belts as soon as possible.

8.MAKE CERTAIN that the cutting head is aligned properly. Misalignment can adversely affect blade life.

9. The blade flanges must have a diameter of 4 in. Undersize flanges will reduce blade life and cause breakage. Therefore, they should be replace at once.

10.Cutting blades must fit the arbor snugly. This is very important with diamond blades as pounding will occur and serious blade damage can result. If the arbor shoulder of the inner blade flange is grooved from blade slippage, the flange must be replaced.

11.Inspect the conveyor cart periodically. Replace the wood insert and wheels when necessary.

12.Lubricate spindle bearings after each day's operation. When dry cutting, grease bearings several times during the day's operation to protect them from the dust.

13.Replace the spindle bearings as soon as they begin to make any strange noises. Worn bearings can destroy blades very quickly.

14.Grease pivot bearings periodically.

Bearing Lubrication Care

There are two (2) grease points (Figure 27) for the MP2 (Electric Motors) and four (4) grease points for the MP2 (Gasoline Engine). Use only Premium Lithium 12 based Grease, conforming to NLG1 Grade #1 consistency. Grease daily.

Figure 27. Zerk Fittings (Lubrication)

MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (3/12/13) — PAGE 29

Page 28 Page 30
Page 29
Image 29
Multiquip MP2090HP, MP2050E1, MP2050E3 manual MP2 Masonry SAW Maintenance SAW
Page 28 Page 30

MP2090HP, MP2050E3, MP2050E1 specifications

The Multiquip MP2050E1, MP2050E3, and MP2090HP are powerful and versatile electric-powered concrete and masonry saws designed for a variety of cutting applications. Built with durability and performance in mind, these models cater to the needs of professional contractors, offering exceptional efficiency and precision in both residential and commercial projects.

The MP2050E1 features a high-torque electric motor that ensures reliable operation and consistent cutting performance. It comes equipped with a 20-inch blade capacity, allowing users to tackle medium to large-sized jobs with ease. The saw is designed with an ergonomic handle and adjustable height for optimal user comfort during extended use. Additionally, the MP2050E1 boasts a compact design, making it easy to transport and maneuver around job sites.

On the other hand, the MP2050E3 is an upgraded version that incorporates advanced features while maintaining the same blade capacity as its predecessor. This model includes a three-phase motor, which enhances power efficiency and increases the saw's longevity. The MP2050E3 is engineered with a robust chassis for increased stability during operation, and it also offers improved dust management capabilities to keep the work area clean and safe.

The Multiquip MP2090HP stands out with its higher horsepower motor, optimizing productivity for heavy-duty cutting tasks. This model supports a larger blade size of up to 30 inches, making it ideal for cutting thicker materials. The MP2090HP is equipped with a sophisticated water control system that ensures consistent cooling of the blade, preventing overheating and prolonging blade life. Its heavy-duty construction is designed to withstand the rigors of demanding job sites, offering maximum reliability.

All three models utilize cutting-edge technology, including adjustable cutting depth settings, which allow operators to customize their cutting depth for precision and versatility. They also feature high-performance bearings that provide smooth blade rotation, enhancing overall cutting efficiency.

In summary, the Multiquip MP2050E1, MP2050E3, and MP2090HP are exemplary tools for professionals in the concrete and masonry industry. Each model boasts unique features tailored to meet varying job requirements, while their advanced technologies ensure high performance, safety, and ease of use. Whether tackling small renovations or large construction projects, these saws provide the reliability and power needed to achieve exceptional results.