MP2 MASONRY SAW — STARTUP/SHUTDOWN (GASOLINE ENGINE)

5.Grasp the starter grip (Figure 23) and slowly pull it out. The resistance becomes the hardest at a certain posi- tion, corresponding to the compression point. Pull the starter grip briskly and smoothly for starting.

Figure 23. Starter Grip

CAUTION - Engine Starter Rope Safety

DO NOT pull the starter rope all the way to the end. DO NOT release the starter rope after pulling. Allow it to rewind as soon as possible. Failure to do so could damage your engine.

6.If the engine has started, slowly return the choke lever (Figure 21) to the OPEN position. If the engine has not started repeat steps 1 through 5.

7.Before the saw is placed into operation, run the engine for several minutes. Check for fuel leaks, and noises that would associate with loose guards and/or covers.

8.Gradually move the engine throttle lever toward the fast position. (All cutting should be done at full throttle).

9.Avoid overloading the engine when cutting. In the event that the engine becomes overloaded, turn the engine ON/OFF switch to the OFF position (Figure 25) and allow the engine to cool before attempting to restart.

WARNING - Burn Hazard

Engine components can generate extreme heat.To prevent burns, DO NOT touch these areas while the engine is running or immediately after operations. NEVER operate the engine with heat shields or heat guards removed.

Stopping the Engine

1. Set the engine throttle lever to slow speed and let the engine idle for 3-5 minutes.

2.Turn the engine ON/OFF switch to the OFF position (Figure 25).

3.Place the fuel valve lever in the closed position.

4.Let the engine cool.

5.Using a soft cloth, clean any excess debris or residue that may have accumulated on the saw.

6.Store saw in a clean dry location where it will be out of the reach of children.

WARNING - Engine Speed when Cutting

ALWAYS cut with the saw at FULL THROTTLE. Attempting to cut with the saw at less than full throttle could cause the blade to bind or stop abruptly in the slab resulting in serious injury to the operator or others in the area.

MQ MP2 MASONRY SAW — OPERATION MANUAL — REV. #2 (3/12/13) — PAGE 27

Page 26 Page 28
Page 27
Image 27
Multiquip MP2050E1, MP2050E3, MP2090HP manual Stopping the Engine, Starter Grip
Page 26 Page 28

MP2090HP, MP2050E3, MP2050E1 specifications

The Multiquip MP2050E1, MP2050E3, and MP2090HP are powerful and versatile electric-powered concrete and masonry saws designed for a variety of cutting applications. Built with durability and performance in mind, these models cater to the needs of professional contractors, offering exceptional efficiency and precision in both residential and commercial projects.

The MP2050E1 features a high-torque electric motor that ensures reliable operation and consistent cutting performance. It comes equipped with a 20-inch blade capacity, allowing users to tackle medium to large-sized jobs with ease. The saw is designed with an ergonomic handle and adjustable height for optimal user comfort during extended use. Additionally, the MP2050E1 boasts a compact design, making it easy to transport and maneuver around job sites.

On the other hand, the MP2050E3 is an upgraded version that incorporates advanced features while maintaining the same blade capacity as its predecessor. This model includes a three-phase motor, which enhances power efficiency and increases the saw's longevity. The MP2050E3 is engineered with a robust chassis for increased stability during operation, and it also offers improved dust management capabilities to keep the work area clean and safe.

The Multiquip MP2090HP stands out with its higher horsepower motor, optimizing productivity for heavy-duty cutting tasks. This model supports a larger blade size of up to 30 inches, making it ideal for cutting thicker materials. The MP2090HP is equipped with a sophisticated water control system that ensures consistent cooling of the blade, preventing overheating and prolonging blade life. Its heavy-duty construction is designed to withstand the rigors of demanding job sites, offering maximum reliability.

All three models utilize cutting-edge technology, including adjustable cutting depth settings, which allow operators to customize their cutting depth for precision and versatility. They also feature high-performance bearings that provide smooth blade rotation, enhancing overall cutting efficiency.

In summary, the Multiquip MP2050E1, MP2050E3, and MP2090HP are exemplary tools for professionals in the concrete and masonry industry. Each model boasts unique features tailored to meet varying job requirements, while their advanced technologies ensure high performance, safety, and ease of use. Whether tackling small renovations or large construction projects, these saws provide the reliability and power needed to achieve exceptional results.
Top Page Image Contents