Multiquip MQD2H manual Preparation For Long-Termstorage, Pump Storage

PREPARATION FOR LONG-TERM STORAGE

Pump Storage

For storage of the pump for over 30 days, the following is required:

Drain the fuel tank completely.

Run the engine until the fuel is completely consumed.

Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage.

Remove the pump cover and clean inside of pump housing. Coat inside of pump housing with a light film of oil to reduce corrosion. A spray can of oil works well for this application.

Cover suction and discharge ports with duct tape to prevent any foreign matter from falling into pump.

Cover pump and engine with plastic covering or equivalent and store in a clean, dry place.

PAGE 26 — MQD2H/3H DIAPHRAGM PUMPS — OPERATION AND PARTS MANUAL — REV. #6 (10/27/11)