Multiquip MQP20P manual when heated, DO NOT fill on unlevel ground, inspection/setup, Fuel EXPANDS

Models: MQP20P

1 80
Download 80 pages 37.79 Kb
Page 24
Image 24
DO NOT fill on unlevel ground

inspection/setup

1.Place the generator level with the ground. Failure to do so will cause fuel to spill from the tank before reaching full capacity (Figure 8).

3.Monitor the fuel gauge while filling fuel tank. Stop filling when the fuel gauge indicates full (Figure 10). DO NOT wait for fuel to rise in filler neck.

70

Ground

Figure 8. Only Fill on Level GroundUnlevel

Level Ground

=

DO NOT fill on unlevel ground

! ONLY use #2 diesel fuel when refueling.Figure 10. Full Fuel TankFigure 9. Fueling the Generator!

Ground

Unlevel

Level Ground

1/2

E SourceFuel EXPANDS F

Figure 8. Only Fill on Level Ground

when heatedFigure 11. Fuel ExpansionNOTICE

ONLY use #2 diesel fuel when refueling.

2.Unlatch and remove the cabinet door of the generator. Remove fuel cap and fill tank (Figure 9).

Figure 10. Full Fuel Tank

Manual background CAUTION

DO NOT OVERFILL fuel system. Leave room for fuel expansion. Fuel expands when heated (Figure 11).

DIESEL

FUEL

Figure 9. Fueling the Generator
Source

Heat

Fuel EXPANDS

when heated

!

!

 

1/2

 

E

F

 

 

Figure 11. Fuel Expansion

page 24 —MQP20P STANDBY GENERATOR • operation and parts manual — rev. #1 (11/28/11)

Page 24
Image 24
Multiquip MQP20P when heated, DO NOT fill on unlevel ground, ONLY use #2 diesel fuel when refueling, inspection/setup