MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05) — PAGE 17
MRH-800DS— VIBRATION ROLLER COMPONENTS
Figure 3 illustrates the location of the major components
for the MRH-800DS Vibration Roller. The function of each
component is described below:
1. Fuel Tank/Cap – Fill with diesel fuel. Fuel tank holds
approximately 2 gallons (7.5 liters). DO NOT top off fuel.
Wipe up any spilled fuel immediately.
2. Center Cover – When opened and supported by strut,
provides access to oil pump and filter, battery, V-belt, and
clutch box.
3. Vibration Rollers – 25-inch wide steel drums that provide
compaction force in the compaction and patching of asphalt
type surfaces.
4. Front Headlights – Activate using switch on control
handle. Use to illuminate ground durring nighttime or low
light operating conditions.
5. Hydraulic Oil Gauge – Indicates the hydraulic oil level.
6. Oil Tank – Fill with proper grade of hydraulic oil.
7. Vibrator Oil Level Plug – Remove to check vibrator oil
level.
8. Lifting Hook – Used to lift the machine with crane or other
lifting device.
9. Engine – This machine uses the Yanmar L100A engine.
Refer to the engine Owner’s Manual for more information.
10. Water Tank– Holds 10.57 gallons (40 liters) for the sprinkler
system.
11. Parking Brake – Makes sure machine will not accidentally
move when parked or not in use.