Multiquip manual MRH-800DS Handle BAR/LEVER Components

MRH-800DS — HANDLE BAR/LEVER COMPONENTS

HANDLE BAR/LEVER COMPONENTS

Figure 4 illustrates the location of the major lever components on the handle bar of the machine. Each component is described below:

1.Travel Lever – Controls the direction of travel of the machine (forward and reverse).

2.Horn Button – When pressed, gives a warning sound of the machine approaching.

3.	Vibration Lever – Turns vibration on and off.
4.	Throttle Lever – Controls the start up of the machine.

5.Dead-Man Device – When pressed or hit while traveling in reverse, causes the travel lever to return to neutral position to stop the machine.

6.Light ON/OFF Switch - Turns headlight on and off.

7.Starter Switch - Engine starts when key is turned to the RUN position

MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05) — PAGE 19